|
|
Products > System-On-Modules (SOMs) > MYC-YT113i (Allwinner T113-i) > MYC-YT113i |
|
|
MYC-YT113i |
- Up to 1.2GHz Allwinner T113-i Dual-core ARM Cortex-A7 MPU with Single-core HiFi4 DSP
- 512MB/1GB DDR3, 4GB/8GB eMMC, 32KB EEPROM
- 1.0mm pitch 140-pin Stamp Hole Expansion Interface + 50-pin LGA
- Supports Running Linux OS |
|
|
|
|
|
Measuring only 37mm by 39mm, the MYC-YT113i has the same 140-pin Castellated-Hole expansion interface pinout signals with the MYC-YT113X but supporting larger capacities of external DDR3 memory (512MB/1GB), while the MYC-YT113X is fixed at 128MB on-chip DDR3 memory. It is based on Allwinner T113-i processor which features up to 1.2GHz Dual-core ARM Cortex-A7 MPU with a RISV slave core and a single-core HiFi4 DSP. The standard configurations have 4GB or 8GB eMMC options. It is capable of running Linux and suitable for applications such as HMI, industrial automation, display and control terminals.

MYC-YT113i (Top-view and Bottom-view)
The MYD-YT113i Development Board is built around the MYC-YT113i and has explored a rich set of peripherals and interfaces to the base board including serial ports, one Gigabit Ethernet, two USB 2.0 HOST and one USB 2.0 OTG, one Micro SD card slot, one M.2 Socket for USB based 4G/5G LTE Module with two SIM card holders, one USB2.0 based WiFi module, one GPIO/I2C/UART/SPI/CAN extension header, Audio input/output and LVDS display interface.
MYD-YT113i Development Board (Top-view)
MYD-YT113i Development Board (Bottom-view)
MYIR also offers MY-WIREDCOM RPI Module (RS232/RS485/CAN) and MY-LVDS070C LCD Module as options for the MYD-YT113i Development Board to enhance the functionality of the board.
Features
Mechanical Parameters
-
Dimensions: 37mm x 39mm
-
PCB Layers: 8-layer design
-
Power supply: 5V/1A
-
Working temperature: -40~85 Celsius (industrial grade)
Processor
-
Allwinner T113-i processor
- Up to 1.2GHz Dual-core Arm Cortex-A7 CPU
- Single-core HiFi4 DSP
- Supports H.265/H.264 4K video decoding
Memory
-
512MB/1GB DDR3
-
4GB/8GB eMMC
-
32KB EEPROM
Peripherals and Signals Routed to Pins
-
1.0mm pitch 140-pin stamp hole expansion interface + 50-pin LGA
- 1 x RGMII/RMII
- 2 x USB2.0
- 6 x UART
- 2 x CAN
- 4 x TWI
- 2 x SPI
- 1 x GPADC and 4 x TPADC
- 1 x MIPI DSI
- 2 x LVDS
- 1 x RGB
- 1 x CVBS Out (TV Out)
- 1 x Parallel CSI
- 2 x CVBS In (TV In)
- 2 x I2S
- Up to 81 GPIOs
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and CPU Module pin-out description file.
OS Support
Other MYIR's Allwinner Products
https://www.myirtech.com/allwinnerseries.asp
MYD-LT527 Development Board (MYC-LT527 as core board, Allwinner T527)
MYD-YT507H Development Board (MYC-YT507H as core board, Allwinner T507)
MYD-YT113X Development Board (MYC-YT113X as core board, Allwinner T113-S3)
|
Hardware Specification
The MYC-YT113i is using 13 x 13 mm, 337-LFBGA package Allwinner T113-i processor which is the Multi-Media decoding platform. T113-i integrates a 64-bit XuanTie C906 RISC-V CPU, a dual-core Arm Cortex-A7 CPU, and a HiFi4 DSP to provide the high-efficient computing power. It supports the full format decoding such as H.265, H.264, MPEG-1/2/4, JPEG, etc. The independent encoder can encode in JPEG or MJPEG. Integrated multi ADCs/DACs and I2S/PCM/DMIC/OWA audio interfaces can work seamlessly with the CPU to accelerate multimedia algorithms and improve the user experience. T113-i supports RGB/LVDS/MIPI DSI/CVBS OUT display output interfaces to meet the requirements of the different screen display. T113-i comes with extensive connectivity and interfaces, such as USB, SDIO, EMAC, TWI, UART, SPI, PWM, GPADC, LRADC, TPADC, IR TX&RX, etc. Besides, T113-i can connect with other different peripherals like Wi-Fi and BT via SDIO and UART.
Features
|
Description
|
CPU
|
-
64-bit Xuantie C906 RISC-V
-
Dual-core ARM Cortex -A7
- 32 KB L1 I-cache + 32 KB L1 D-cache per core, and 256 KB L2 cache
|
DSP
|
-
Single-core HiFi4
-
32 KB I-cache + 32 KB D-cache
-
64 KB I-ram + 64 KB D-ram
|
Memory
|
-
DDR2/DDR3, up to 2 GB
-
SD3.0/eMMC 5.0, SPI Nor/NAND Flash
|
Video Engine
|
-
Video decoding
- H.265 up to 4K@30fps
- H.264 up to 4K@24fps
- H.263, MPEG-1/2/4, JPEG, Xvid, Sorenson Spark, up to 1080p@60fps
-
Video encoding
- JPEG/MJPEG up to 1080p@60fps
- Supports input picture scaler up/down
|
Display Engine
|
-
Allwinner SmartColor2.0 post processing for an excellent display experience
-
Supports de-interlace (DI) up to 1080p@60fps
-
Supports G2D hardware accelerator including rotate, mixer, lbc decompression
|
Video OUT
|
-
CVBS OUT interface, supporting NTSC and PAL format
-
RGB LCD output interface up to 1920 x 1080@60fps
-
Dual link LVDS interface up to 1920 x 1200@60fps
-
4-lane MIPI DSI interface up to 1920 x 1080@60fps
|
Video IN
|
-
8-bit parallel CSI interface
-
CVBS IN interface, supporting NTSC and PAL format
|
Audio
|
-
2 DACs and 3 ADCs
-
Analog audio interfaces: MICIN1P/N, MICIN2P/N, MICIN3P/N, FMINL/R, LINEINL/R, LINEOUTLP/N, LINEOUTRP/N, HPOUTL/R
-
Digital audio interfaces: 12S/PCM, DMIC, OWA IN/OUT
|
Connectivity
|
-
USB2.0 0TG, USB2.0 Host
-
SDIO 3.0, SPI x 2, UART x 6, TWI x 4, CAN x 2
-
PWM (8-ch), GPADC (2-ch), LRADC (1-ch), TPADC (4-ch), IR TX&RX
-
10/100/1000M EMAC with RMII and RGMII interfaces
|
Package
|
-
LFBGA 337 balls, 13 mm x 13 mm
|
Features of T113-i Processor
Allwinner T113-i Block Diagram
MYC-YT113i Function Block Diagram
Dimensions of MYC-YT113i
|
Software Features
The MYC-YT113i CPU Module supports Linux OS and comes with complete software package. The kernel and many peripheral drivers are available in source code to assist clients to expedite their development. The following are a summary of the software features:
Item
|
Feature
|
Description
|
Source Code
|
Bootloader
|
U-boot
|
Boot boot program uboot_2018.05
|
YES
|
Linux kernel
|
Linux kernel
|
Customized base on official kernel_5.4.61 version
|
YES
|
Device driver
|
USB Host
|
USB Host driver
|
YES
|
USB OTG
|
USB OTG driver
|
YES
|
I2C
|
I2C bus driver
|
YES
|
SPI
|
SPI bus driver
|
YES
|
Ethernet
|
YT8531SH driver
|
YES
|
SDHI
|
EMMC/SD card storage driver
|
YES
|
LVDS
|
LCD driver
|
YES
|
Touch
|
Touch screen driver
|
YES
|
Audio
|
SPDIF driver
|
YES
|
Watchdog
|
Watchdog driver
|
YES
|
4G/5G
|
4G/5G driver
|
YES
|
PWM
|
PWM control driver
|
YES
|
ADC
|
ADC driver
|
YES
|
RTC
|
RTC driver
|
YES
|
GPIO
|
Universal GPIO driver
|
YES
|
UART
|
RS232/RS485/TTL driver
|
YES
|
CAN
|
CAN driver
|
YES
|
WIFI
|
RTL8731BU driver
|
YES
|
Images
|
t113i_linux_myir_emmc_core
|
Image built with Buildroot, excluding GUI interface
|
YES
|
t113i_linux_myir_emmc_full
|
A fully functional image built with Buildroot
|
YES
|
MYC-YT113i Software Features
|
Relative Download and Links
You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.
1
|
MYC-YT113i Overview
|
1.00 MB
|
|
2
|
MYD-YT113i Development Board Overview
|
1.64 MB
|

|
3
|
MYC-YT113i Pinouts Description
|
33 KB
|

|
4
|
3D STEP file of MYC-YT113i
|
1.87 MB
|

|
|
MYC-YT113i (Top-view)
MYC-YT113i (Bottom-view)
MYD-YT113i Development Board (Top-view)
MYD-YT113i Development Board (Bottom-view)
|
Price and Ordering
Item
|
Part No.
|
Packing List
|
Unit Price
|
Ordering
|
MYC-YT113i
System-On-Module
|
MYC-YT113i-4E256D-110-I
|
- One MYC-YT113i SOM
|
USD18.50
|
|
MYC-YT113i-4E512D-110-I
|
USD19.80
|
|
MYC-YT113i-8E512D-110-I
|
USD22.80
|
|
MYC-YT113i-8E1D-110-I
|
USD34.80
|
|
MYD-YT113i
Development Board
|
MYD-YT113i-4E256D-110-I
|
- One MYD-YT113i board
(including MYC-YT113i)
- One USB to UART cable
- One 12V/2A Power adapter
- One DC power jack adapter
- One Quick Start Guide
|
USD60
|
|
MYD-YT113i-4E512D-110-I
|
USD62
|
|
MYD-YT113i-8E512D-110-I
|
USD65
|
|
MYD-YT113i-8E1D-110-I
|
USD75
|
|
MY-WIREDCOM
RPI Module
|
MY-WIREDCOM
|
RPI Mofule for extension
of RS232/RS485/CAN
|
USD18
|

|
|
MY-LVDS070C
|
7-inch LCD Module
with capacitive touch screen
|
USD99
|
|
Note:
1. One MYD-YT113i Development Board includes one MYC-YT113i mounted on the base board. If you need more SOMs, you can order extra ones.
2. Discount is available for mass orders. Please contact MYIR for inquiries.
3. We accept custom design based on the MYD-YT113i, whether reducing, adding or modifying the existing hardware according to customer’s requirement.
|
|
|
|
|
|
|
|