MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products!
We also offer ODM & OEM services, welcome your inquiry!
http://www.myirtech.com/xilinxseries.asp
The MYD-Y7Z010/20-V2 development board is powered by Xilinx XC7Z010 (Zynq-7010) or XC7Z020 (Zynq-7020) SoC device. It is a cost-effective and high-performance solution for industrial application such as Industrial Ethernet, machine vision, PLC/HMI and etc. The board is ready to run Linux and supports industrial operating temperature ranging from -40 to +85 Celsius.
The MYD-Y7Z010/20-V2 development board employs the MYC-Y7Z010/20-V2 as the controller board by populating the CPU Module on its base board through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface, allowing users to take the advantages of numerous extended out signals. Core components on CPU Module including Z-7010 or Z-7020 processor, 512MB DDR3 SDRAM, 4GB eMMC, 16MB QSPI Flash, Gigabit Ethernet PHY and external watchdog. Additionally, the MYD-Y7Z010/20-V2 development board takes full features of the Zynq SoC to create a rich set of peripherals to the base board through headers and connectors including RS232, RS485, USB Host, three Gigabit Ethernet ports, CAN, TF card slot, JTAG as well as one 2.54mm pitch 2 x 25-pin expansion header to let more GPIOs available for further extension.
MYD-Y7Z010/20-V2 Development Board
Features
Mechanical Parameters
-
Dimensions: 153mm x 80mm (base board), 75mm x 50mm (CPU Module)
-
PCB layers: 4-layer design (base board), 10-layer design (CPU Module)
-
Power supply: 12V/2A
-
Working temp.: -40~85 Celsius (industrial grade)
The MYD-Y7Z010/20-V2 Controller Board (MYC-Y7Z010/20-V2 CPU Module)
MYC-Y7Z010/20-V2 CPU Module
SoC
-
Xilinx XC7Z010-1CLG400I (Zynq-7010) or XC7Z020-1CLG400I (Zynq-7020) SoC
- 667MHz dual-core ARM® Cortex™-A9 MPCore processor (up to 866MHz, for XC7Z010 or XC7Z020)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
- NEON™ & Single / Double Precision Floating Point for each processor
- Supports a Variety of Static and Dynamic Memory Interfaces
Memory
-
512MB DDR3
-
4GB eMMC
-
16MB QSPI Flash
Peripherals and Signals Routed to Pins
-
10/100/1000M Ethernet PHY (YT8521SH)
-
External watchdog
-
Three LEDs
- One red LED for power indicator
- One green LED for FPGA program done indicator
- One flashing green LED for system indicator
-
1.27mm 180-pin expansion connectors bring out below signals:
- One Gigabit Ethernet
- One USB OTG 2.0
- Two Serial ports
- Two I2C
- Two CAN BUS
* Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
- Two SPI (can be implemented through PL pins)
- ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
- One SDIO
The MYD-Y7Z010/20-V2 Base Board (MYB-Y7Z010/20)
PS Unit
-
One USB Host
-
One RS232 serial port (with isolation)
-
One RS485 (with isolation)
-
One TF card slot
-
One CAN interface (with isolation)
-
One 10/100/1000Mbps Ethernet interface
-
One 2.54mm pitch 14-pin JTAG interface
-
One Debug serial port (UART)
PL Unit
-
One 2.54mm pitch 2 x 25-pin GPIO expansion header
-
Two 10/100/1000Mbps Ethernet interfaces
-
Three user LEDs
OS Support
Other MYIR's Xilinx Products
http://www.myirtech.com/xilinxseries.asp
Z-turn Board V2 Single Board Computer (based on Zynq-7010 / 7020)
Z-turn Lite Single Board Computer (based on Zynq-7010)
MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board, Zynq-7015)
MYD-C7Z010/20-V2 Development Board (MYC-C7Z010/20-V2 CPU Module as core board, Zynq-7010 / 7020)
MYD-CZU3EG/4EV/5EV-V2 Development Board (MYC-CZU3EG/4EG/5EV-V2 CPU Module as core board, ZU3EG/4EV/5EV)
FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)
FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)
|