FZ5 EdgeBoard AI Box (Xilinx ZU5EV) (1)

Single Board Computers

MYS-6ULX (NXP i.MX 6UL/6ULL) (1)

MYS-8MMX-V2 (i.MX 8M Mini) (1)

Rico Board (TI AM437x) (1)

FZ5 Card (Xilinx ZU5EV) (1)

FZ3 Card (Xilinx ZU3EG) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

Z-turn Board V2 (Zynq-7010/20) (1)

Z-turn Lite (Xilinx Zynq-7010) (1)

System-On-Modules (SOMs)

MYC-YT113X (Allwinner T113-S3) (1)

MYC-YT507H (Allwinner T507-H) (1)

MYC-YT113i (Allwinner T113-i) (1)

MYC-LT527 (Allwinner T527) (1)



MYC-C7Z015 (Xilinx Zynq-7015) (1)

MYC-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYC-C7Z010/20-V2 (Z-7010/20) (1)

MYC-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYC-J7A100T (XC7A100T Artix-7) (1)

MYC-YA15XC-T (ST STM32MP151) (1)

MYC-YA157C-V3 (ST STM32MP157) (1)

MYC-YF13X (ST STM32MP135) (1)

MYC-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYC-JX8MMA7 (8M Mini+Artix-7) (1)

MYC-JX8MX (NXP i.MX8M) (1)

MYC-C8MMX-V2 (i.MX 8M Mini) (1)

MYC-JX8MPQ (NXP i.MX 8M Plus) (1)

MYC-J1028X (NXP LS1028A) (1)

MYC-LMX9X (NXP i.MX93) (1)

MYC-IMX28X (NXP i.MX28) (1)

MYC-C437X-V2 (TI AM437x) (1)

MYC-YM62X (TI AM62x) (1)

MYC-J335X-V2 (TI AM335x) (1)

MYC-Y335X-V2 (TI AM335x) (1)

MYC-C335X-V4 (TI AM335x) (1)

MYC-C335X-GW (TI AM335x) (1)

MYC-JD9360 (SemiDrive D9-Pro) (1)

MYC-SAMA5D3X (Atmel A5D3) (1)

MYC-SAM9X5 (Atmel SAM9X5) (1)

Development Boards

MYD-YT113X (Allwinner T113-S3) (1)

MYD-YT113i (Allwinner T113-i) (1)

MYD-YT507H (Allwinner T507-H) (1)

MYD-LT527 (Allwinner T527) (1)

Remi Pi (Renesas RZ/G2L) (1)

MYD-YG2LX (Renesas RZ/G2L) (1)

MYD-YG2UL (Renesas RZ/G2UL) (1)

MYD-C7Z015 (Xilinx Zynq-7015) (1)

MYD-Y7Z010/20 (Zynq-7010/20) (1)

MYD-C7Z010/20-V2 (Z-7010/20) (1)

MYD-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYD-J7A100T (XC7A100T Artix-7) (1)

MYD-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYD-YF13X (ST STM32MP135) (1)

MYD-YA15XC-T (ST STM32MP151) (1)

MYD-YA157C-V3 (ST STM32MP157) (1)

MYD-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYD-JX8MMA7 (8M Mini+Artix-7) (1)

MYD-C8MMX-V2 (i.MX 8M Mini) (1)

MYD-JX8MPQ (NXP i.MX 8M Plus) (1)

MYD-JX8MX (NXP i.MX8M) (1)

MYD-YM62X (TI AM62x) (1)

MYD-J1028X (NXP LS1028A) (1)

MYD-LMX9X (NXP i.MX93) (1)

MYD-C437X-V2-PRU (TI AM437x) (1)

MYD-C437X-V2 (TI AM4378) (1)

MYD-C335X-V4 (TI AM335x) (1)

MYD-J335X-V2 (TI AM335x) (1)

MYD-Y335X-V2 (TI AM335x) (1)

MYD-C335X-GW (TI AM335x) (1)

MYD-JD9360 (SemiDrive D9-Pro) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

Z-turn Lite IO Cape (for Z-turn Lite) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-LVDS070C LCD Module (1)

MY-WF003U USB WiFi Module (1)

MY-WF005S WiFi/BT Module (1)

MY-CAM002U Camera Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CAM003M Camera Module (1)


MY-SODIMM200 Socket (1)

Discontinued Products

MYC-C7Z010/20 (Zynq-7010/20) (1)

MYC-Y7Z010/20 (Zynq-7010/20) (1)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-CZU3EG/4EV/5EV (Xilinx) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAM9X5-V2 (Atmel SAM9X5) (1)

MYC-Exynos4412 (Samsung) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

MYD-CZU3EG/4EV/5EV (Xilinx) (1)

VECP Starter Kit (Xilinx ZU3EG) (1)



MYD-IMX28X (NXP i.MX28) (1)

MYD-LPC185X (NXP LPC185x) (1)

MYD-LPC435X (NXP LPC435x) (1)

MYD-LPC1788 (NXP LPC1788) (1)

MYD-SAM9X5-V2 (Atmel SAM9X5) (1)

MYD-SAM9X5 (Atmel SAM9X5) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-SAMA5D3X (Atmel A5D3) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYS-8MMX (NXP i.MX 8M Mini) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-SAM9X5 (Atmel SAM9X5) (1)

MY-WF004S SDIO WiFi Module (1)

MY-UART012U Convertor (1)

MYD-Y7Z010/20 IO Cape (1)


MY-EVC5100S-HMI (TI AM335x) (1)

          Products >  Development Boards >  MYD-C437X-V2 (TI AM4378) > MYD-C437X-V2 Development Board
MYD-C437X-V2 Development Board

MYD-C437X-V2 Development Board

- MYC-C437X-V2 as Controller Board
- Two 0.8mm pitch 100-pin Connectors for Board-to-Board Connections
- Up to 1GHz TI AM437x Series ARM Cortex-A9 Processors
- 2 x Serial ports, 4 x USB Host, 1 x USB Device, 2 x Gigabit Ethernet, 2 x CAN, RS485, 2 x Camera, TF
- Supports HDMI and LCD Display
- Optional LCD, WiFi and Camera Modules
- Ready-to-Run Linux 4.1.18

MYIR is a thrid party Partner of TI, welcome to use MYIR's TI series products!

We also offer ODM & OEM services, welcome your inquiry!

MYD-C437X-V2 Development Board is a complete evaluation platform for Texas Instruments (TI) Sitara AM437x family (AM4376, AM4377, AM4378 and AM4379 ) of ARM Cortex-A9 Microprocessors (MPUs) with optional 3D graphics acceleration and a quad-core Programmable Real-time Unit (PRU) as well as dual camera support. Typical applications are patient monitoring, navigation equipment, industrial automation, portable data terminals, bar code scanners, point of service, portable mobile radios, test and measurement and more others.

The MYD-C437X-V2 development board is using the MYC-C437X-V2 SOM as the core controller board which integrates the core components including the AM437x processor, 512MB DDR3, 4GB eMMC, 32KB EEPROM, Gigabit PHY and PMIC (TPS65218). The MYC-C437X-V2 is mounted onto the MYD-C437X-V2 base board through two 0.8mm pitch 2*50-pin board-to-board connectors. In addition to those functions provided by the SOM, the base board has extended a rich set of peripherals through headers and connectors from the SOM and some extended controller chips including two serial ports, four USB Host ports, one USB Device port, dual Gigabit Ethernet ports, one CAN, one RS485, two camera interfaces, one Micro SD, HDMI, LCD, Touch screen and more others.

MYD-C437X-V2 Development Board

The MYC-C437X-V2 series have four models with different AM437x processors. They are sharing the same pin-out with software fully compatible. And the minor differences are mainly from the processors features. MYIR delivers the board with AM4378 by default.

TI AM437x Devices

MYD-C437X-V2 board is able to run Linux OS. It is delivered with some necessary cable accessories and a product disk containingLinux 4.1.18 software packages and detailed documents. MYIR also offers optional 4.3- and 7-inch LCD module (with touch screen), USB based Wi-Fi and Camera modules and BUS based Camera modules for the MYD-C437X-V2 board. The complete platform provides a quick AM437x starter kit for users when getting the goods out-of-the-box right away.


Mechanical Parameters

  • Dimensions: 177mm x 106mm (base board), 60mm x 45mm (SOM)
  • PCB Layers: 4-layer design (base board), 8-layer design (SOM)
  • Power supply: +5V/2A (base board), +5V/0.33A (SOM)
  • System static power: about 5V/0.2A (base board), about 5V/0.7A (base board + SOM)
    about 5V/1.1A (base board + SOM + 4.3-inch LCD)
    about 5V/1.2A (base board + SOM +7-inch LCD)

  • Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

The MYD-C437X-V2 Controller Board (MYC-C437X-V2)



  • TI AM437x (AM4376, AM4377, AM4378 and AM4379)
    - Up to 1GHz Sitara ARM Cortex-A9 32-Bit RISC processor
    - POWERVR SGX Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects
    - Single-cycle vector floating point (VFP)
    - Dual camera and display processing subsystem
    - Cryptographic acceleration and secure boot
    - PRU-ICSS enables simultaneous industrial Ethernet protocols and motor feedback protocols
    - Support for 32 bit LPDDR2/DDR3/DDR3L
    - Low power: ~5mW deep sleep and < 0.1mW RTC-only
    - Simplified power sequence for flexible power design


  • 512MB DDR3 SDRAM (256MB is optional)
  • 4GB eMMC Flash (reserved 256/512MB Nand Flash design)
  • 16MB QSPI Flash (reserved design, not soldered)

Peripherals and Signals Routed to Pins ( MYC-C437X-V2 Pinouts Description)

  • Power Management IC (TPS65218B1RSLR)
  • Gigabit Ethernet PHY
  • One power indicator (Red LED)
  • One user LED (Green)
  • Tow 0.8mm pitch 100-pin board-to-board expansion connectors can carry out interfaces below
    - 2 x USB
    - 6 x Serial ports
    - 2 x I2C
    - 2 x CAN
    - 2 x SPI
    - 14 x ADC (8 channels from ADC1 and 6 channels from ADC0)
    - 3 x SDIO

The MYD-C437X-V2 Base Board

MYD-C437X-V2 Base Board

  • Serial ports
  • - 1 x 5-wire RS232 Debug serial port (DB9)
    - 1 x 5-wire RS232 serial port (UART1)
    - 1 x RS485 (with isolation)
  • USB
  • - 4 x USB2.0 Host ports
    - 1 x Mini USB2.0 Device port
  • 2 x 10/100/1000Mbps Ethernet interfaces
  • 2 x CAN interface (with isolation)
  • 1 x TF card slot
  • 1 x HDMI output interface
  • 1 x LCD interface (16-/24-bit true color, supports optional 4.3-inch and 7-inch TFT LCD)
  • 2 x Camera interfaces (0.5mm pitch 30-pin FPC connectors)
  • 1 x 4-wire resistive touch screen interface
  • 1 x Audio input port (3.5mm jack, do not provide driver at present)
  • 1 x Stereo Audio output port (3.5mm jack, do not provide driver at present)
  • 1 x 2.54mm pitch 20-pin JTAG interface
  • 4 x Buttons (1 x Reset button, 1 x PMIC, 2 x User buttons)
  • 1 x Power indicator (Red LED)
  • 3 x User LEDs (Blue)
  • 2 x 2.0mm 20-pin expansion connectors
  • - 8 x ADC
    - 2 x SPI
    - 2 x I2C
    - 2 x UART

OS Support

  • Linux 4.1.18

MYD-C437X-V2 in the Video

- Development Board based on TI Sitara AM437x

Other MYIR's TI Products

Rico Board Single Board Computer (based on AM437x)

MYD-C335X-GW Development Board (MYC-C335X-GW as core board, TI AM335x)

MYD-J335X-V2 Development Board (MYC-J335X-V2 as core board, TI AM335x)

MYD-Y335X-V2 Development Board (MYC-Y335X-V2 as core board, TI AM335x)

MYD-C335X-V4 Development Board (MYC-C335X-V4 as core board, TI AM335x)

MYD-YM62X Development Board (MYC-YM62X as core board, TI AM6254/6252/6231)

Hardware Specification

The TI AM437x high-performance processors are based on the ARM Cortex-A9 core. Customers using this next generation solution will see an increase in performance, as well as extensive reuse from the ARM Cortex-A8 offerings.

A. Use of TSC will limit available ADC0 inputs.

B. Max clock: LPDDR2 = 266 MHz; DDR3/DDR3L = 400 MHz
AM437x Function Block Diagram

Increasing performance and peripheral support
Sitara AM437x processors deliver the right balance of:
•       Up to 1GHz of processing power
•       3D graphics accelerator
•       On-chip quad-core PRU co-processor for real-time processing
•       Improved vector floating-point unit

•       LPDDR2/DDR3
•       QSPI
•       Display subsystem

•       Two parallel camera ports
•       Dual-port 1Gb Ethernet switch
•       Two independent, eight-channel ADCs
•       WiLink connectivity drivers
•       Industrial protocols via PRU-ICSS

Figure 1-5 AM437x Processors

* PRU-ICSS is a programmable real-time core for industrial communication protocols.

* Standard Protocols for AM437x processors include protocols such as Ethernet/IP, PROFINET™ RT/IRT, PROFIBUS™, Sercos III, EnDat, Sigma Delta and more.

* All Protocols for AM437x processors include standard protocols plus EtherCAT® and POWERLINK

MYC-C437X-V2 Function Block Diagram

MYD-C437X-V2 Development Board Function Block Diagram

Dimensions of MYC-C437X-V2

Dimensions of MYD-C437X

Software Features

MYIR’s MYD-C437X-V2 development board is ready to run Linux and is provided with software packages. Many peripheral drivers are in source code to help accelerate customers’ designs with a stable and reliable hardware and software platform. The software features are summarized as below:






Bootstrap program


The primary bootstrap (source code)


The secondary bootstrap (source code)



Linux 4.1.18 (source code)


USB Host

USB Host driver (source code)

USB Device

USB Device driver (source code)


Gigabit Ethernet driver (source code)


MMC/SD/TF card driver (source code)


Nand Flash driver (source code)


eMMC driver (source code)

LCD Controller

LCD driver (source code, supports MYIR’s 4.3- and 7- inch LCD)


RTC driver (source code)


HDMI driver (source code)

Touch driver

Resistive and Capacitive touch screen driver (source code)


Button driver (source code)


UART driver (source code)


LED driver (source code)


GPIO driver (source code)


Watchdog driver (source code)


Camera driver (source code)


CAN driver (source code)


ADC driver (source code)


SGTL5000 driver (source code, do not provide driver at present)


PWM driver (source code)


RS485 driver (source code)

File system

Buildroot with
QT library (V5.6.2)

Provide ubi image file and buildroot in source code


Audio, CAN, CAMERA, EEPROM, framebuffer, gpio, keypad, led, rtc, RS232, RS485

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1 TI AM437x Datasheet 2.76 MB
2 TI AM437x Technical Reference Manual 19.8 MB
3 MYC-C437X-V2 Overview 1.67 MB
4 MYC-C437X-V2 Pinouts Description 60 KB
5 MYD-C437X-V2 Base Board Schematic 355 KB
6 MYD-C437X-V2 Overview 1.9 MB

MYD-C437X-V2 Development Board

MYD-C437X-V2 Development Board Base Board

MYC-C437X-V2 Top-view

MYC-C437X-V2 Bottom-view

Price and Ordering


Part No.

Unit Price


MYD-C437X-V2 Development Board
(1GHz AM4378, 512MB DDR3, 4GB eMMC, industrial grade)

(1GHz AM4378, 512MB DDR3, 4GB eMMC, industrial grade)

MY-LCD43TP 4.3 inch LCD Module with resistive touch screen



MY-LCD70TP 7 inch LCD Module with resistive touch screen



MY-LCD70TP-C 7 inch LCD Module with capacitive touch screen

MY-WF003U USB WiFi Module

MY-CAM002U USB Camera Module

MY-CAM011B BUS Camera Module MY-CAM011B USD25


1. The MYD-C437X-V2 development board already has one MYC-C437X-V2 CPU module mounted on its base board, if you need additional CPU module, please order extra;

2. Bulk discounts are available. Please contact MYIR for inquires.

3. The boards of commercial grade can support 0~70 Celsius operation temperature. The boards of industrial grade can support -40~85 Celsius operation temperature.

5. We accept custom design based on the MYD-C437X-V2, whether reducing, adding or modifying the existing hardware according to customer’s requirement.