MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products!
We also offer custom design services, welcome your inquiry!
http://www.xilinx.com/alliance/memberlocator/1-2wv1bc.html
The Z-turn Lite is an ultra-cost-effective lite version of MYIR’s Z-turn board. It is built around 667MHz Xilinx Zynq-7007S SoC which is among the new Zynq Z-7000S family with a Single-core ARM Cortex-A9 processor and integrated Artix-7 Field Programmable Gate Array (FPGA) logic. The Zynq-7010 Dual-core ARM Cortex-A9 MPCore processor can also be compatible to be used on this board. It is a minimal and compact system of Xilinx Z-7007S or Z-7010 SoC and provides numerous pending configuration of PL resources. It is an excellent reference design and evaluation board for development based on Xilinx Zynq-7000 series SoCs.
Z-turn Lite Top-view
Z-turn Lite Bottom-view
The Z-turn Lite takes full features of the Zynq Z-7007S or Z-7010 all programmable SoC. It is equipped with 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and a set of peripherals including Micro USB OTG, 10/100/1000Mbps Ethernet, TF, JTAG, Debug UART, etc. Additionally, there is one 120 position connector socket on the rear of the board to bring out as many as IO signals for user extensions.
The Z-turn Lite is capable of running Linux operating system and provided with Linux 4.14.0 SDK, the kernel and many drivers are in source code. The Z-turn Lite Kit is delivered with complete accessories including one micro USB cable, one Ethernet cable, one 4GB TF card, one USB-to-UART cable, one 5V power adapter and product disk which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional camera and LCD modules as well as an I/O expansion board Z-turn Lite IO Cape for Z-turn Lite which provides many peripheral signals and interfaces including HDMI, GPIO, LCD, Camera and Pmod interfaces.
Features
|
Item
|
Features
|
|
SoC
|
Xilinx XC7Z007S-1CLG400C (Zynq-7007S) or XC7Z010-1CLG400C (Zynq-7010)
- ARM® Cortex™-A9 MPCore processor
Up to 766MHz single-core processor (for XC7Z007S)
766MHz dual-core processor (up to 866MHz, for XC7Z010)
- Integrated Artix-7 class FPGA subsystem
with 23K logic cells, 14,400 LUTs, 66DSP slices (for XC7Z007S)
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
- NEON™ & Single / Double Precision Floating Point for each processor
- Supports a Variety of Static and Dynamic Memory Interfaces
|
|
Memory
|
512MB DDR3 SDRAM (2 x 256MB, 32-bit)
|
|
Storage
|
4GB eMMC Flash
16MB QSPI Flash
TF card interface
|
|
Communications
|
1 x 10/100/1000M Ethernet
1 x Micro USB2.0 OTG
|
|
Input and Output
|
1 x 2.54mm pitch 14-pin JTAG interface
1 x 0.5mm pitch 120 Position Connector Socket for Expansion interface
1 x 2.54mm pitch 4-pin Debug UART interface
|
|
Others
|
2 x Buttons (1x Reset, 1 x User)
5 x LEDs
- 1 x User LED
- 1 x FPGA configuration indicator
- 1 x FPGA initialization indicator
- 1 x Power indicator
- 1 x USB overcurrent indicator
|
|
Dimensions
|
91mm x 63mm (10-layer PCB design )
|
|
Power supply
|
DC 5V/2A
|
|
Temp.
|
0~70 Celsius
|
|
Power consumption
|
8W
|
|
OS Support
|
Linux 4.14.0
|
|
Target Applications
|
Evaluation and Prototyping for Zynq-7000 AP SoC
Multi-Axis Motor Control
Machine Vision
Programmable Logic Controller
Industrial Automation
Test & measurement
|
Z-turn Lite IO Cape
Z-turn Lite IO Cape
Z-turn Lite connected with Z-turn Lite IO Cape
Other MYIR's Xilinx Products
http://www.myirtech.com/xilinxseries.asp
VECP Starter Kit (Vision Edge Computing Platform based on Zynq UltraScale+ ZU3EG MPSoC)
MYD-CZU3EG/4EV Development Board (MYC-CZU3EG/4EV CPU Module as core board)
FZ3 Card (Deep Learning Accelerator Card based on Zynq UltraScale+ ZU3EG MPSoC)
Z-turn Board Single Board Computer (based on Zynq-7010 / Zynq-7020)
MYD-C7Z010/20 Development Board (MYC-C7Z010/20 CPU Module as core board)
MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)
MYD-Y7Z010/20 Development Board (MYC-Y7Z010/20 CPU Module as core board)
|
Overview
