Solutions

MYD-LR3568-GK-B IPC Box (RK3568) (1)

FZ5 EdgeBoard AI Box (Xilinx ZU5EV) (1)

Single Board Computers

MYS-6ULX (NXP i.MX 6UL/6ULL) (1)

MYS-8MMX-V2 (i.MX 8M Mini) (1)

Rico Board (TI AM437x) (1)

FZ5 Card (Xilinx ZU5EV) (1)

FZ3 Card (Xilinx ZU3EG) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

Z-turn Board V2 (Zynq-7010/20) (1)

Z-turn Lite (Xilinx Zynq-7010) (1)

Remi Pi (Renesas RZ/G2L) (1)

MYD-LT527-SX (Allwinner T527) (1)

System-On-Modules (SOMs)

MYC-LR3568 (Rockchip RK3568) (1)

MYC-LR3576 (Rockchip RK3576) (1)

MYC-YT113i (Allwinner T113-i) (1)

MYC-YT507H (Allwinner T507-H) (1)

MYC-LT527 (Allwinner T527) (1)

MYC-YT113X (Allwinner T113-S3) (1)

MYC-YG2UL (RENESAS RZ/G2UL) (1)

MYC-YG2LX (RENESAS RZ/G2L) (1)

MYC-C7Z015 (Xilinx Zynq-7015) (1)

MYC-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYC-C7Z010/20-V2 (Z-7010/20) (1)

MYC-J7A100T (XC7A100T Artix-7) (1)

MYC-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYC-YF13X (ST STM32MP135) (1)

MYC-YA15XC-T (ST STM32MP151) (1)

MYC-YA157C-V3 (ST STM32MP157) (1)

MYC-LD25X (ST STM32MP257) (1)

MYC-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYC-C8MMX-V2 (i.MX 8M Mini) (1)

MYC-JX8MX (NXP i.MX8M) (1)

MYC-JX8MMA7 (8M Mini+Artix-7) (1)

MYC-J1028X (NXP LS1028A) (1)

MYC-JX8MPQ (NXP i.MX 8M Plus) (1)

MYC-LMX9X (NXP i.MX93) (1)

MYC-YM62X (TI AM62x) (1)

MYC-C437X-V2 (TI AM437x) (1)

MYC-IMX28X (NXP i.MX28) (1)

MYC-J335X-V2 (TI AM335x) (1)

MYC-Y335X-V2 (TI AM335x) (1)

MYC-C335X-V4 (TI AM335x) (1)

MYC-C335X-GW (TI AM335x) (1)

MYC-JD9360 (SemiDrive D9-Pro) (1)

MYC-SAMA5D3X (Atmel A5D3) (1)

MYC-LMA35 (Nuvoton MA35D1) (1)

MYC-SAM9X5 (Atmel SAM9X5) (1)

Development Boards

MYD-LR3568 (Rockchip RK3568) (1)

MYD-LR3576 (Rockchip RK3576) (1)

MYD-YT113i (Allwinner T113-i) (1)

MYD-YT113X (Allwinner T113-S3) (1)

MYD-YT507H (Allwinner T507-H) (1)

MYD-LT527 (Allwinner T527) (1)

MYD-YG2UL (Renesas RZ/G2UL) (1)

MYD-YG2LX (Renesas RZ/G2L) (1)

MYD-C7Z015 (Xilinx Zynq-7015) (1)

MYD-Y7Z010/20 (Zynq-7010/20) (1)

MYD-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYD-C7Z010/20-V2 (Z-7010/20) (1)

MYD-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYD-J7A100T (XC7A100T Artix-7) (1)

MYD-YA15XC-T (ST STM32MP151) (1)

MYD-YF13X (ST STM32MP135) (1)

MYD-YA157C-V3 (ST STM32MP157) (1)

MYD-LD25X (ST STM32MP257) (1)

MYD-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYD-JX8MPQ (NXP i.MX 8M Plus) (1)

MYD-JX8MX (NXP i.MX8M) (1)

MYD-C8MMX-V2 (i.MX 8M Mini) (1)

MYD-JX8MMA7 (8M Mini+Artix-7) (1)

MYD-YM62X (TI AM62x) (1)

MYD-LMX9X (NXP i.MX93) (1)

MYD-J1028X (NXP LS1028A) (1)

MYD-C437X-V2 (TI AM4378) (1)

MYD-C437X-V2-PRU (TI AM437x) (1)

MYD-C335X-V4 (TI AM335x) (1)

MYD-J335X-V2 (TI AM335x) (1)

MYD-Y335X-V2 (TI AM335x) (1)

MYD-C335X-GW (TI AM335x) (1)

MYD-JD9360 (SemiDrive D9-Pro) (1)

MYD-LMA35 (Nuvoton MA35D1) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

Z-turn Lite IO Cape (for Z-turn Lite) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-LVDS070C LCD Module (1)

MY-WF003U USB WiFi Module (1)

MY-WF005S WiFi/BT Module (1)

MY-CAM002U Camera Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CAM003M Camera Module (1)

MY-CAM004M Camera Module (1)

MY-CAM005M Camera Module (1)

MY-WIREDCOM RPI Module (1)

MY-SODIMM200 Socket (1)

Discontinued Products

MYC-C7Z010/20 (Zynq-7010/20) (1)

MYC-Y7Z010/20 (Zynq-7010/20) (1)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-CZU3EG/4EV/5EV (Xilinx) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAM9X5-V2 (Atmel SAM9X5) (1)

MYC-Exynos4412 (Samsung) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

MYD-CZU3EG/4EV/5EV (Xilinx) (1)

VECP Starter Kit (Xilinx ZU3EG) (1)

MYD-Y6ULX-CHMI (i.MX 6UL/6ULL) (1)

MYD-Y6ULX-HMI (i.MX 6UL/6ULL) (1)

MYD-IMX28X (NXP i.MX28) (1)

MYD-LPC185X (NXP LPC185x) (1)

MYD-LPC435X (NXP LPC435x) (1)

MYD-LPC1788 (NXP LPC1788) (1)

MYD-SAM9X5-V2 (Atmel SAM9X5) (1)

MYD-SAM9X5 (Atmel SAM9X5) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-SAMA5D3X (Atmel A5D3) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYS-8MMX (NXP i.MX 8M Mini) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-SAM9X5 (Atmel SAM9X5) (1)

MY-WF004S SDIO WiFi Module (1)

MY-UART012U Convertor (1)

MYD-Y7Z010/20 IO Cape (1)

MYB-Y6ULX-HMI-4GEXP (1)

MY-EVC5100S-HMI (TI AM335x) (1)

          Products >  System-On-Modules (SOMs) >  MYC-LT527 (Allwinner T527) > MYC-LT527
 
MYC-LT527

MYC-LT527

- Up to 1.8GHz Allwinner T527 Octa-core ARM Cortex-A55 MPU with GPU
- Neural Processing Unit (NPU) operating at up to 2 TOPs
- 2GB/4GB LPDDR4, 16GB/32GB eMMC, 32Kbit EEPROM
- Power Management IC (PMIC)
- 381-pin Expansion Interface with LGA Package
- Supports for Linux, Android and Ubuntu OS
 

MYIR is a thrid party partner of Allwiinner, welcome to use MYIR's Allwinner series products!
We also offer custom design services, welcome your inquiry!

https://www.myirtech.com/allwinnerseries.asp


Measuring only 43mm by 45mm, the MYC-LT527 is a compact System-on Module (SoM) based on the Allwinner T527 processor, features an Octa-core ARM Cortex-A55 CPU clocked at up to 1.8GHz and a G57 MC1 GPU. It supports 4K@30fps H.265 video decoding and 4K@25fps H.264 video encoding. The T527 can also support up to 2 TOPs NPU to further enhancing AI computing capabilities.


The MYC-LT527 incorporates the T527 processor and offers onboard 2GB/4GB LPDDR4, 16GB/32GB eMMC, 32Kbit EEPROM and a Power management IC (PMIC). It has 381-pin expansion interface design in LGA package, facilitating soldering on base boards. This interface enables the base board to carry most I/O signals to and from the CPU module. With its robust performance, extensive peripheral resources and cost-effectiveness, the MYC-LT527 is well-suited for a range of applications including high-performance industrial robots, energy and electric power, medical equipment, display and controller machines, Edge Board AI boxes, vehicle terminals, and other embedded devices that require media and AI functionalities.



MYC-LT527M Top-view and Bottom-view (delivered with shielding cover installed by default)


The MYC-LT527 supports for Linux 5.15, Android 13 and Ubuntu operating systems. MYIR offers a comprehensive software package including kernel and driver source codes, as well as compilation tools, to enable users to start their development rapidly and easily.


MYIR offers the MYD-LT527 Development Board for evaluating the MYC-LT527. This board is assembled by soldering the MYC-LT527 SOM onto a base board which is served as an expansion board specifically tailored for using with the MYC-LT527. It is equipped with one USB3.0, two USB2.0, two Gigabit Ethernet, two CAN interfaces, one WiFi/Bluetooth module, Micro SD card slot, Audio interface, two Mini-CSI interfaces as well as multiple display interfaces: HDMI, Mini-DP, MIPI-DSI and LVDS. It also features a 40-pin RPI compatible expansion interface and one MYIR custom 40-pin expansion interface, MI Fans PI interface, for increased expandability. MYIR also offers MY-CAM003M Camera Module, MY-WIREDCOM RPI Module (RS232/RS485/CAN) and MY-LVDS070C LCD Module as options for the board which have greatly enhanced the functionality of the board.

MYD-LT527 Development Board Top-view (delivered with heatsink installed by default)


MYD-LT527 Development Board Bottom-view

Features

Mechanical Parameters

  • Dimensions: 45mm x 43mm
  • PCB Layers: 12-layer design
  • Power supply: 5V/3A
  • Working temperature: -40~85 Celsius (industrial grade) or -20~70 Celsius (extended temperature)

Processor

  • Allwinner T527 processor
    - Octa-core ARM Cortex-A55, up to 1.8GHz
    - RISC-V CPU, up to 200 MHz
    - 600MHz HIFI4 Audio DSP
    - ARM G57 MC1 GPU
    - Up to 2 Tops NPU

Memory

  • 2GB/4GB LPDDR4

  • 16GB/32GB eMMC

  • 32Kbit EEPROM

Peripherals and Signals Routed to Pins

  • Power Management IC

  • 381-pin LGA Expansion Interfaces
    - 2 x RGMII/RMII
    - 1 x PCIe2.1, RC mode (reused with USB3.1)
    - 1 x USB 2.0 DRD
    - 1 x USB 2.0 Host
    - 1 x USB 3.1 DRD (reused with PCIe2.1)
    - 2 x SDIO 3.0
    - 10 x UART
    - 2 x CAN
    - 9 x I2C
    - 30 x PWM
    - 4 x SPI
    - 24 x GPADC, 12-bit
    - 2 x LRADC, 6-bit
    - 1 x Parallel CSI, 16-bit
    - 1 x HDMI 2.0
    - 1 x eDP
    - 2 x LVDS with dual link
    - 2 x RGB
    - 4+4-lane, 4+2+2-lane, or 2+2+2+2-lane MIPI-CSI
    - 2 x MIPI-DSI
    - 2 x DACs and 3 x ADCs
    - 3 x audio outputs
    - 3 x audio inputs
    - 4 x I2S/PCM
    - 1 x SPIF I/O
    - 2 x CIR RX and 1 x CIR TX
    - Up to 138 x GPIO

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and SOM pin-out description file.


OS Support

  • Linux 5.15
  • Android 13
  • Ubuntu 22.04


Other MYIR's Allwinner Products

https://www.myirtech.com/allwinnerseries.asp

MYD-YT113X Development Board (MYC-YT113X CPU Module as core board, Allwinner T113-S3)

MYD-YT113i Development Board (MYC-YT113i CPU Module as core board, Allwinner T113-i)

MYD-YT507H Development Board (MYC-YT507H CPU Module as core board, Allwinner T507-H)






Hardware Specification

Allwinner T527 series features high-performance octa-core Cortex-A55 AI platform SoCs for the electronic commercial, industrial, and automotive fields. The chip family integrates octa-core Cortex-A55 CPU, a HiFi4 DSP, 2 TOPS NPU, G57 MC1 GPU, 32-bit DDR3/DDR3L/DDR4/LPDDR3/LPDDR4/LPDDR4X DRAM, high-speed interfaces (PCIe2.1 and USB3.1), automotive interface (CAN), multi video output interfaces (2*RGB/2*Dual-LVDS/2*MIPI DSI/HDMI/eDP), and video input interfaces (MIPI CSI). The chip family supports 4K@60fps H.265 decoder, 4K@30fps H.264 decoder, 1080p@60fps H.264 encoder, DI, and SmartColor system, which provides users with smooth experience and professional AI visual effect. T527 series can be used in Content sharing and self-service interactive terminals, Smart manufacturing, and other electronic commercial and industrial devices.


MYIR is using the T527M00X0DCH and T527M02X0DCH processors for the MYC-LT527. The main differences of the T527 series devices are described as in below form:

Devices

NPU

Video Decoder

Package

T527H02X0DCH

Support

H.265, 4K@60fps, 10bits

17 mm x 17 mm, FCBGA 664 balls

T527H00X0DCH

Not Support

H.265, 4K@60fps, 10bits

17 mm x 17 mm, FCBGA 664 balls

T527M02X0DCH

Support

H.265, 4K@30fps, 8bits

17 mm x 17 mm, FCBGA 664 balls

T527M00X0DCH

Not Support

H.265, 4K@30fps, 8bits

17 mm x 17 mm, FCBGA 664 balls

T527 Series Device Summary


T527 Processor Block Diagram


MYC-LT527 Block Diagram



Dimensions of MYC-LT527




Software Features

The MYC-LT527 supports for Linux, Android and Ubuntu OS and is furnished with comprehensive software packages. To facilitate clients in accelerating their projects, the kernel and numerous peripheral drivers are provided in source code format. The following is a concise overview of the software's key features:

Item

Features

Description

Source code

Bootloader

U-boot

Boot program uboot_2018.02

YES

Linux kernel

Linux kernel

Customized base on official kernel_5.15 version

YES

Device driver

USB Host

USB Host driver

YES

USB OTG

USB OTG driver

YES

USB Mouse

Standard USB mouse driver

YES

USB Camera

Standard UVC driver-free camera driver

YES

USB 4G

EC20/EC200

YES

USB 5G

Quectel RG200U

YES

I2C

I2C bus driver

YES

RTC

LK8563T driver

YES

SPI

QSPI, SPI bus driver

YES

SDHI

eMMC, SD/TF card storage driver

YES

WiFi

AP6256 driver (SDIO)

YES

Ethernet

YT8531SH driver

YES

MIPI-CSI

MY-CAM003M camera module driver (OV5640)

YES

MIPI-DSI

LT9611 driver (MIPI-to-HDMI, 1920x1080p60)

YES

LVDS

MY-LVDS070C display module driver

(1024*600 pixels resolution)

YES

HDMI Out

HDMI display driver, 4K@60fps, with audio

YES

DP

Standard DP display driver, 1080p@60fps, with audio

YES

Audio

SPDIF, MIC, HPout, LINEout and I2S drivers

YES

GPIO

GPIO driver

YES

Watchdog

Watchdog driver

YES

Key

Key driver

YES

LED

LED driver

YES

DI&DO

DI&DO driver

YES

PWM

PWM driver

YES

ADC

ADC driver

YES

UART

RS232/RS485/TTL UART Driver

YES

CAN

CAN Driver

YES

Timer

Timer Driver

YES

File system

myir-image-Android 13

Compiled and built based on Android13 SDK

YES

myd-lt527-core.img

Linux image without GUI, built by buildroot

YES

myd-lt527-full.img

Linux image with GUI, built by buildroot

YES

Ubuntu 22.04

Coming soon

YES

MYC-LT527 Software Features




Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.


1 MYC-LT527 Overview 2.34 MB
2 Allwinner T5 Series Brief Introduction 162 KB
3 MYD-LT527 Development Board Overview
3.34 MB
4 MYC-LT527 Pinouts Description
52.9 KB
5 3D STEP file of MYC-LT527 2.01 MB

MYC-LT527 SOM


MYD-LT527 Development Board


MYD-LT527 Development Board with installed heatsink



Price and Ordering


Item

Part No.

Packing List

Unit Price

Ordering

MYC-LT527
MYC-LT527MN-32E4D-180-I-G
(with NPU, Industrial)
One MYC-LT527 SOM
USD89
MYC-LT527MN-16E2D-180-I-G
(with NPU, Industrial)
USD69
MYC-LT527M-16E2D-180-I-G
(without NPU, Industrial)
USD55

MYC-LT527M-16E2D-180-E
(without NPU, Extended)
USD40

MYD-LT527MN-32E4D-180-I
(with NPU, Industrial)
- One MYD-LT527 development board
(including MYC-LT527 SOM)

- One USB Type-A to Type-C cable

- One 12V/3A Power adapter
- One Quick Start Guide

USD119
MYD-LT527MN-16E2D-180-I
(with NPU, Industrial)
USD99

MYD-LT527M-16E2D-180-I
(without NPU, Industrial)
USD89
MYD-LT527M-16E2D-180-E
(without NPU, Extended)
USD79
MY-WIREDCOM
RPI Mofule for extension
of RS232/RS485/CAN
USD18

MY-CAM003M
MIPI Camera Module USD25

MY-LVDS070C
7-inch LCD Module
with capacitive touch screen
USD99
Note:

1. One MYD-LT527 Development Board includes one MYC-LT527 SOM mounted on the base board. If you need more SOMs, you can order extra ones.


2. The items of industrial grade support -40 to 85 degree Celsius temperature range; the items of extended temperature range support -20 to 70 degree Celsius temperature range.


3. Bulk discount is available. Please contact MYIR for inquiries.


4. We accept custom design based on the MYD-LT527, whether reducing, adding or modifying the existing hardware according to customer’s requirement.