To optimize the cost and lead time, MYIR has launched MYC-C7Z010/20-V2 for replacement of the MYC-C7Z010/20. The hardware is fully compatible. Please contact MYIR for any queries.
https://www.myirtech.com/list.asp?id=694
The MYC-C7Z010/20 CPU Module is a Linux-ready ZYNQ-based SOM (System on Module) available for either the XC7Z010 or XC7Z020version. It integrates Xilinx’s Dual Cortex-A9 + FPGA All Programmable SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. Two 0.8mm pitch 140-pin board-to-board connectors provide a large number of I/O signals for ARM peripherals and FPGA I/Os to enable your base board extension. It is ideal for your next embedded design, thus helping you reduce development effort and speed up your time to market.
MYC-C7Z010 CPU Module for Xilinx Zynq-7010
MYC-C7Z020 CPU Module for Xilinx Zynq-7020
MYC-C7Z010/20 Top-view MYC-C7Z010/20 Bottom-view
The MYC-C7Z010/20 CPU Module is the core board of MYD-C7Z010/20 development board which is an excellent platform for evaluation
and prototype based on MYIR’s MYC-C7Z010/20 CPU module. It takes full features
of the Zynq-7010 and 7020 SoC and has extended rich peripherals to the base
board including four USB Host ports, RS232
serial port, Gigabit Ethernet, CAN, LCD and HDMI. It has one XADC header to
allow you take advantage of Xilinx XADC; it has three PMoD headers to meet your
I/O needs with PMoDs (only for 7020); it also has a low-pin
count FMC connector to allow various FMC cards for custom I/O options. Typical applications are Industrial
Automation, Test & measurement, Medical Equipment, Intelligent Video
Surveillance, Aerospace and military, etc.
MYD-C7Z010/20 Development Board
Features
Mechanical Parameters
-
Dimensions: 75mm x 55mm (10-layer PCB design)
-
Power supply: 5V/0.5A
-
Working temp.: 0~70 Celsius or -40~85 Celsius (industrial grade)
SoC
-
Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-2CLG400 (Zynq-7020)
- 667MHz ARM® dual-core Cortex™-A9 MPCore processor
(up to 866MHz)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
- NEON™ & Single / Double Precision Floating Point for each
processor
- Supports a Variety of Static and Dynamic Memory Interfaces
Memory
-
1GB DDR3 SDRAM (512MB*2)
-
4GB eMMC
-
32MB QSPI Flash (16MB is optional)
Peripherals and Signals
Routed to Pins
-
10/100/1000M Ethernet PHY
-
External watchdog
-
Three LEDs
- One blue LED for power indicator
- One red LED for FPGA program done indicator
- One green user LED
-
Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
- One Gigabit Ethernet
- One USB OTG 2.0
- Two Serial ports
- Two I2C
- Two CAN BUS
* Serial ports, I2C and CAN signals will be
reused in PS part, or implemented through PL pins
- Two SPI (can be implemented through PL pins)
- ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
- One SDIO
OS Support
Other MYIR's Xilinx Products
http://www.myirtech.com/xilinxseries.asp
Z-turn Board V2 Single Board Computer (based on Zynq-7010 / 7020)
Z-turn Lite Single Board Computer (based on Zynq-7010)
MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)
MYD-Y7Z010/20-V2 Development Board (MYC-Y7Z010/20-V2 CPU Module as core board)
MYD-CZU3EG/4EV/5EV-V2 Development Board (MYC-CZU3EG/4EG/5EV-V2 CPU Module as core board)
FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)
FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)
|