|
MYIR is a thrid party Partner of TI, welcome to use MYIR's TI series products!
We also offer ODM & OEM services, welcome your inquiry!
https://www.myirtech.com/tiseries.asp
The MYC-J335X-V2 is a feature-packed
System on Module (SOM) supporting the TI AM335x (AM3352, AM3354, AM3356, AM3357, AM3358 and AM3359) ARM
Cortex-A8 Sitara processors which is capable of running at up to 1GHz with a
rich 2D/3D graphics accelerator. It is a ready-to-run Linux controller board,
supporting -40 to
+85 Celsius extended
temperature operation and has brought out up to two CAN bus, two Gigabit
Ethernet, two USB OTG and up to six Serial ports and more other signals from
one DDR2 SO-DIMM 200-pin gold finger expansion interface, thus makes it ideal
for many industrial applications like game peripherals, printers, medical devices,
educational terminals, intelligent charging system, intelligent vending
machine, weighing system, etc.

MYC-J335X-V2
The MYC-J335X-V2 has integrated some core components on board including the AM335x
processor, 256MB DDR3 SDRAM, 256MB Nand Flash, 32Kb EEPROM, Gigabit Ethernet
PHY chip as well as Power Management IC. It can also have flexible and
compatible selections of AM335x CPU, 128/512MB DDR3 and 128/512MB Nand Flash to
meet users’ different requirements. The TI AM335x CPU consists of 6 different devices with
various options including speed grades, packages, graphics and peripherals. The image below gives a brief overview of options.
AM335x Device
MYIR
also offers a low-cost, high-performance development board MYD-J335X-V2 to
provide an excellent evaluation platform to enable your quickly evaluation of
the AM335x microprocessors and the MYC-J335X-V2 on this platform.
MYD-J335X-V2 Development Board
Features
Mechanical Parameters
-
Dimensions: 67.6mm x 45mm
-
PCB Layers: 8-layer design
-
Power supply: +5V/0.8A
-
Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)
Processor
-
TI AM3352, AM3354, AM3356, AM3357, AM3358, AM3359
- Up to 1GHz ARM Cortex-A8 32-bit RISC MPU
- NEON™ SIMD Coprocessor
- 32KB/32KB of L1 Instruction/Data Cache with Single-Error Detection (parity)
- 256KB of L2 Cache with Error Correcting Code (ECC)
- SGX530 Graphics Engine
- Programmable Real-Time Unit Subsystem
Memory
-
128/256/512MB DDR3 SDRAM
-
128/256/512MB Nand Flash
Peripherals and Signals Routed to Pins
-
On-board Gigabit Ethernet PHY
-
External Watchdog circuit
-
Power Management Unit (TPS65217C)
-
One power indicator (Red LED)
-
One user LED (Green)
-
DDR2 SO-DIMM 200-pin gold finger connector (the
extended signals please refer to the pinouts diagram)
- 2 x Gigabit Ethernet
- 2 x USB OTG
- Up to 6 x Serial ports
- Up to 2 x I2C
- Up to 2 x SPI
- Up to 2 x CAN
- 8 x ADC
- 2 x PWM
- 3 x SDIO (One SDIO has multiplexed with Nand Flash signals)
OS
Other MYIR's TI Products
http://www.myirtech.com/tiseries.asp
Rico Board Single Board Computer (TI AM4378)
MYD-C335X-GW Development Board (MYC-C335X-GW as core board, TI AM335x)
MYD-C335X-V4 Development Board (MYC-C335X-V4 as core board, TI AM335x)
MYD-Y335X-V2 Development Board (MYC-Y335X-V2 as core board, TI AM335x)
MYD-C437X-V2 Development Board (MYC-C437X-V2 as core board, TI AM4378)
MYD-YM62X Development Board (MYC-YM62X CPU Module as core board, TI AM6254/6252/6231)
|
Hardware Specification
The TI AM335x microprocessors, based on the ARM Cortex-A8, operating at up to 1GHz, are enhanced with image, graphics processing, peripherals and industrial interface options such as EtherCAT and PROFIBUS. The device supports the following high-level operating systems (HLOSs) that are available free of charge from TI:
The AM335x microprocessor contains these subsystems:
-
Microprocessor unit (MPU) subsystem based on the ARM Cortex-A8 microprocessor.
-
POWERVR SGX™ Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects.
-
The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) is separate from the ARM core, allowing independent operation and clocking for greater efficiency and flexibility.
-
The PRU-ICSS enables additional peripheral interfaces and real-time protocols such as EtherCAT, PROFINET, EtherNet/IP, PROFIBUS, Ethernet Powerlink, Sercos, and others.
AM335x ARM Cortex™-A8 Processors
|
Core Feature
|
AM3352
|
AM3354
|
AM3356
|
AM3357
|
AM3358
|
AM3359
|
Package
|
15x15mm, 0.8mm (ZCZ)
|
CPU Speed (MHz)
|
300, 600, 800, 1000
|
600, 800,1000
|
300, 600,800
|
300, 600,800
|
600, 800,1000
|
800
|
Core Internal Memory
|
64KB SRAM shared w/
Data 32KB Cache, Programmable 32KB Cache
|
On-chip L2 (KB)
|
256
|
External Memory Interface
|
DDR2/DDR3/DDR3L/mDDR (LPDDR), 2x16-bit, NAND ECC
|
Graphics
|
-
|
3D Graphics
|
-
|
3D Graphics
|
OS Support
|
Linux, Android, RTOS, Windows Embedded, no-OS
|
Other Hardware Acceleration
|
Crypto Accelerator
|
Crypto
Accelerator
|
2 PRU-ICSS
Crypto Accelerator
|
2 PRU-ICSS
Crypto Accelerator + EtherCAT slave support
|
2 PRU-ICSS
Crypto Accelerator
|
2 PRU-ICSS
Crypto Accelerator
+ EtherCAT slave support
|
10/100/1000 EMAC
|
2 port switch
|
USB 2.0 OTG + PHY
|
2
|
Serial Ports
|
6 UART, 2 SPI, 3 I2C, 2 McASP, 2 CAN, 8 Timers
|
System
|
EDMA, WDT, RTC, 3 eQEP, 3 eCAP, JTAG, ADC (8ch)
|
Parallel
|
3 MMC/SD/SDIO, GPIO
|
Function Block Diagram of MYC-J335X-V2

|
Software Features
MYIR’s
MYC-J335X-V2 is preloaded with Linux 4.1.18 operating system. Many peripheral
drivers are in source code to help accelerate customers’ designs with a stable
and reliable hardware and software platform. The software features are summarized
as below:
Item
|
Features
|
Description
|
Bootstrap
|
SPL
|
The primary
bootstrap (in source code)
|
u-boot
|
The secondary
bootstrap (in source code)
|
Linux kernel
|
Linux 4.1.18
|
Linux kernel
customized for MYD-J335X-V2 (in source code)
|
|
USB Host
USB Device
USB OTG
|
USB
Host/Device/OTG driver (in source code)
|
Ethernet
|
Gigabit Ethernet
driver (in source code)
|
MMC/SD/TF
|
MMC/SD/TF card
driver (in source code)
|
NandFlash
|
NandFlash driver
(in source code)
|
CAN
|
CAN driver (in
source code)
|
RS485
|
RS485 driver (in
source code)
|
Audio
|
Audio driver (in
source code)
|
LCD Controller
|
LCD driver,
support 4.3-inch TFT LCD (in source code)
|
RTC
|
RTC driver (in
source code)
|
Touch driver
|
Resistive Touch
driver (in source code)
|
Button
|
Botton driver
(in source code)
|
UART
|
UART driver (in source
code)
|
LED
|
LED driver (in
source code)
|
GPIO
|
GPIO driver (in
source code)
|
Watchdog
|
Watchdog driver
(in source code)
|
EXT UART
|
Extended UART
driver (in source code)
|
EXT GPIO
|
Extended GPIO
driver (in source code)
|
File System
|
Buildroot
|
Provide tar
package and ubi image file
|
|
Price and Ordering
Item
|
Part No.
|
Unit Price
|
Ordering
|
MYC-J335X-V2
(industrial, 256MB DDR3, 256MB Flash)
|
MYC-J3352-V2-256N256D-80-I
|
USD49
|
|
MYC-J3358-V2-256N256D-100-I
|
USD55
|
|
MYD-J335X-V2 Development Board
(industrial, 256MB DDR3, 256MB Flash)
|
MYD-J3352-V2-256N256D-80-I
|
USD135
|
|
MYD-J3358-V2-256N256D-100-I
|
USD139
|
|
MY-LCD43TP 4.3 inch LCD Module
with resistive touch screen
|
MY-TFT043RV2
|
USD59
|
|
MY-LCD70TP 7 inch LCD Module
with resistive touch screen
|
MY-TFT070RV2
|
USD79
|
|
MY-LCD70TP-C 7 inch LCD Module
with capacitive touch screen
|
MY-TFT070CV2
|
USD89
|
|
Note:
1. The product is delivered with 800MHz AM3352 or 1GHz AM3358 by default. If you need other CPU models, RAM or Flash size, please contact MYIR for availability.
2. Bulk discounts are available. Please contact MYIR for inquiries.
3. Above prices are for boards of industrial grade supporting -40~85 Celsius operation temperature.
4. We accept custom design based on the MYC-J335X-V2, whether reducing, adding or modifying the existing hardware according to customer’s requirement.
|
|
|
|
|
|