MYD-LD25X Development Board

MYIR is an ST Authorized Partner, welcome to use MYIR's ST series products!
We also offer ODM and OEM services, welcome your inquiry!

https://www.myirtech.com/stseries.asp

The MYD-LD25X Development Board is a comprehensive evaluation platform tailored for the ST STM32MP257D processor. This processor features dual ARM Cortex-A35 cores running at up to 1.5GHz and a 400MHz Cortex-M33 core. The board supports for Linux 6.1 and Debian 12 operating systems, and it is capable of functioning within an industrial-grade temperature range, spanning from -40 to +85 degrees Celsius.

The MYD-LD25X Development Board is built around the MYC-LD25X System-On-Module (SOM), leveraging the 252-pin LGA expansion interface to to expose the extensive features of the STM32MP257D Processor to its base board. Operating on a 5V/3A USB power supply, the board boasts a rich set of peripherals, including 2x USB 2.0 Host ports, 1x USB 2.0 OTG, 3x Gigabit Ethernet interfaces, a Micro SD card slot, and an integrated WiFi/Bluetooth module. Additionally, it supports LVDS and HDMI display outputs, incorporates a MIPI-CSI interface, and provides an audio interface. Furthermore, the inclusion of a 2*20-pin Raspberry Pi (RPI) extension interface provides access to additional resources such as GPIO, I2C, UART, SPI, and CAN, enabling users to customize and enhance their development endeavors.

MYD-LD25X Top-view

MYD-LD25X Bottom-view

The MYD-LD25X Development Board is capable of supporting both Linux 6.1 and Debian12 Operating Systems, ensuring stable and efficient performance. MYIR provides abundant software resources, including kernel and driver source code, as well as detailed documentation and tools that facilitate rapid and easy development for users. These resources provide the necessary support to developers, enabling them to focus on creating innovative and exciting applications. It is suitable for a wide range of applications, including high-end industrial HMI, edge computing gateways, new energy charging stations, energy storage EMS systems, industrial automation PLCs, motion controllers, and more.

The MYD-LD25X Development Board comes with a Quick Start Guide and one USB to TTL cable. MYIR also offers
MY-LVDS070C 7-inch LCD Module, MY-CAM003M Camera Module and MY-WIREDCOM RPI Module as add-on options for the board.

Features

Mechanical Parameters

• Dimensions: 120mm x 70mm (base board), 39mm x 37mm (SOM)
• PCB Layers: 6-layer design (base board), 12-layer design (SOM)
• Power supply: 5V/3A (base board), 5V/3A (SOM)
• Working temperature: -40~85 Celsius
  

  (WiFi/BT Module: -30~85 Celsius)

  
  

The MYD-LD25X Controller Board (MYC-LD25X System-On-Module)

MYC-LD25X Top-view and Bottom-view

Processor

• ST STM32MP257D Processor (STM32MP257DAK3)

  - Dual-core Arm Cortex-A35 64-bit RISC core operating at up to 1.5 GHz
  - A Cortex-M33 32-bit RISC core operating at up to 400 MHz
  - Neural Processing Unit (NPU) operating at up to 1.35 TOPS, 3D GPU
  - H.264 encoding/decoding

Memory

• 1GB/2GB LPDDR4

• 8GB eMMC

• 256Kbit EEPROM

Peripherals and Signals Routed to Pins

• Power Management IC: STPMIC25APQR

• 252-pin LGA expansion interface
  - 3x RGMII
  - 1x USB 2.0 Host
  - 1x USB 3.0 OTG
  - 4x USART
  - 5x UART
  - 8x SPI
  - 7x I2C
  - 4x I3C
  - 3x CAN FD
  - 2x SD/MCC
  - 4x SAI
  - 1x Parallel RGB
  - 1x MIPI DSI
  - 2x LVDS
  - 1x MIPI CSI
  - 1x DCMI
  - 1x JTAG
  - 1x SWD
  - Up to 128x GPIOs
  

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and SOM pin-out description file.

The MYD-LD25X Development Board Base Board

• USB Power Supply (Type-C)
• 1x Power Switch
• 1x BOOT Switch
• 3x Buttons (1x USER, 1x Wake Up, 1x Reset)
• 3x Debug Serial ports (one for Cortex-A35, one for Cortex-M33 and one for SWD)
  
• USB
  - 2x USB 2.0 Host ports
  - 1x USB 2.0 OTG port
  
• 3x 10/100/1000 Mbps Ethernet interface (RJ45)
• 1x WiFi/BT Module (complies with IEEE 802.11 a/b/g/n/ac standard and supports Bluetooth V5.2)
• 1x Micro SD Card Slot
• 1x LVDS Display Interface
• 1x HDMI Display Interface
• 1x MIPI-CSI Camera Interface
• 1x Audio Input and Output Interface
• 1x 2.54mm 2 x 20-pin male expansion header
  (RPI interface, GPIO/I2C/UART/SPI/CAN, compatible with Raspberry PI standard 40-pin extension interface)
  Supports MYIR’s MY-WIREDCOM RPI Module to extend RS485, RS232 and CAN functions

OS Support

• Linux 6.1
  
• Debian 12

Other MYIR's ST Products

http://www.myirtech.com/stseries.asp

MYD-YA15XC-T Development Board (MYC-YA15XC-T as core board, STM32MP151)

MYD-YA157C-V3 Development Board (MYC-YA157C-V3 as core board, STM32MP157)

MYD-YF13X Development Board (MYC-YF13X as core board, STM32MP135)