Shopping Cart | 中文网站
 
 

Development Environment

Xilinx SDSoC (1)

Solutions

MYD-Y6ULX-CHMI (i.MX 6UL/6ULL) (1)

MY-EVC5100S-HMI (TI AM335x) (1)

FZ5 EdgeBoard AI Box (Xilinx ZU5EV) (1)

Single Board Computers

MYS-8MMX (NXP i.MX 8M Mini) (1)

MYS-6ULX (NXP i.MX 6UL/6ULL) (2)

Rico Board (TI AM437x) (1)

FZ5 Card (Xilinx ZU5EV) (1)

FZ3 Card (Xilinx ZU3EG) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

Z-turn Lite (Xilinx Z-7007S/7010) (1)

MYS-SAM9X5 (Atmel SAM9X5) (1)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

CPU Modules

MYC-CZU3EG/4EV/5EV (Xilinx) (1)

MYC-Y7Z010/20 (Zynq-7010/20) (1)

MYC-C7Z010/20 (Zynq-7010/20) (1)

MYC-C7Z015 (Xilinx Zynq-7015) (1)

MYC-YA157C (ST STM32MP157A) (1)

MYC-YA15XC-T (ST STM32MP151A) (1)

MYC-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYC-C8MMX (NXP i.MX 8M Mini) (1)

MYC-JX8MX (NXP i.MX8M) (1)

MYC-Y6ULX (NXP i.MX 6UL/6ULL) (1)

MYC-IMX28X (NXP i.MX28) (1)

MYC-C437X (TI AM437x) (1)

MCC-AM335X-J (TI AM335x) (1)

MCC-AM335X-Y (TI AM335x) (1)

MYC-C335X-GW (TI AM335x) (1)

MYC-AM335X (TI AM335x) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-SAMA5D3X (Atmel A5D3) (1)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAM9X5-V2 (Atmel SAM9X5) (1)

MYC-SAM9X5 (Atmel SAM9X5) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

MYC-Exynos4412 (Samsung) (1)

Development Boards

VECP Starter Kit (Xilinx ZU3EG) (1)

MYD-CZU3EG/4EV/5EV (Xilinx) (1)

MYD-C7Z015 (Xilinx Zynq-7015) (1)

MYD-C7Z010/20 (Zynq-7010/20) (1)

MYD-Y7Z010/20 (Zynq-7010/20) (1)

MYD-YA15XC-T (ST STM32MP151A) (1)

MYD-YA157C (ST STM32MP157A) (1)

MYD-IMX28X (NXP i.MX28) (1)

MYD-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYD-Y6ULX (NXP i.MX 6UL/6ULL) (1)

MYD-Y6ULX-HMI (i.MX 6UL/6ULL) (1)

MYD-C8MMX (NXP i.MX 8M Mini) (1)

MYD-JX8MX (NXP i.MX8M) (1)

MYD-AM335X-Y (TI AM335x) (1)

MYD-AM335X-J (TI AM335x) (1)

MYD-C335X-GW (TI AM335x) (1)

MYD-AM335X (TI AM335x) (1)

MYD-C437X (TI AM437x) (1)

MYD-C437X-PRU (TI AM437x) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-SAMA5D3X (Atmel A5D3) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAM9X5-V2 (Atmel SAM9X5) (1)

MYD-SAM9X5 (Atmel SAM9X5) (1)

MYD-LPC185X (NXP LPC185x) (2)

MYD-LPC435X (NXP LPC435x) (2)

MYD-LPC1788 (NXP LPC1788) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

Z-turn Lite IO Cape (for Z-turn Lite) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-LVDS070C LCD Module (1)

MY-WF003U USB WiFi Module (1)

MY-WF004S SDIO WiFi Module (1)

MY-WF005S WiFi/BT Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CAM003M Camera Module (1)

MY-RGB2HDMI Module (1)

MY-WIREDCOM RPI Module (1)

MY-UART012U Convertor (1)

MY-SODIMM200 Socket (1)

MYD-Y7Z010/20 IO Cape (1)

MYB-Y6ULX-HMI-4GEXP (1)

MY-CAM002U Camera Module (1)

    Product Updates
          Products >  Development Boards >  MYD-YA15XC-T (ST STM32MP151A) > MYD-YA15XC-T Development Board
 
MYD-YA15XC-T Development Board

MYD-YA15XC-T Development Board

- MYC-YA15XC-T CPU Module as Controller Board
- ST STM32MP1 MPU based on 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores
- 256MB/512MB DDR3L, 256MB Nand Flash/ 4GB eMMC, 32KB EEPROM, Power Management IC (PMIC)
- 1 x USB Type-C DRP, 2 x USB2.0 HOST, Gigabit Ethernet, LCD, Camera, Micro SD Card Slot
- Supports Running Linux OS
- Optional 7-inch LCD Module, Camera Module, RGB-to-HDMI Module, WiFi/BT Module and RPI Module
 


The
MYD-YA15XC-T development board is using the MYC-YA15XC-T CPU Module as core controller board which is populated on a specially designed base board through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface. The MYD-YA15XC-T is a good reference design for using ST STM32MP1 Processors which features 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores. Typical applications are industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require rich performance and low power.

The MYC-YA15XC-T CPU Module has integrated the STM32MP151 processor (STM32MP151AAC3T by default), a Power-Management IC STPMIC1, DDR3L, Nand Flash or eMMC and 32KB EEPROM. In addition to the main components, the MYD-YA15XC-T has extended a number of peripherals through connectors to its base board including Debug Serial port, USB Type-C DRP, Dual USB2.0 HOST, Gigabit Ethernet, Micro SD Card Slot, LCD and Camera as well as GPIOs through pin headers. MYIR also offers MY-CAM011B Camera Module, MY-RGB2HDMI Module, MY-WF005S WiFi/BT Module, MY-WIREDCOM RPI Module (RS232/RS485/CAN) and MY-LCD70TP-C LCD Module as options for the board which have greatly enhanced the functionality of the board.

MYD-YA15XC-T Development Board Top-view

MYD-YA15XC-T Development Board Bottom-view


The MYD-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code. It is delivered with one Quick Start Guide, one USB Type-C cable, one DC power jack plug adapter and one 5V/2A power adapter to enable users to start rapid development when getting the board out-of-box.


Features

Mechanical Parameters

  • Dimensions: 137.3mm x 105mm (base board), 39mm x 37mm (CPU Module)
  • PCB Layers: 4-layer design (base board), 10-ayer design (CPU Module)
  • Power supply: 5V/2A (base board), 5V/0.5A (CPU Module)
  • Working temperature: -40~85 Celsius

The MYD-YA15XC-T Controller Board (MYC-YA15XC-T CPU Module)


MYC-YA15XC-T CPU Module (delivered with shielding cover by default)

Processor

  • STMicroelectronics STM32MP151AAC3 Microprocessor (STM32MP153AAC3 and STM32MP157AAC3 are compatible and can be customized)
    The STM32MP1 series is available in 3 different lines which are pin-to-pin compatible:
    - STM32MP151: Single Cortex-A7 core up to @ 800 MHz, Cortex-M4 core @ 209 MHz
    - STM32MP153: Dual Cortex-A7 cores up to @ 800 MHz, Cortex-M4 core @ 209 MHz and CAN FD
    - STM32MP157: Dual Cortex-A7 cores up to @ 800 MHz, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD

Memory

  • 256MB DDR3L, 256MB Nand Flash / 512MB DDR3L, 4GB eMMC Flash
  • 32KB EEPROM

Peripherals and Signals Routed to Pins

  • Power Management IC (STPMIC1APQR)
  • 1.0mm pitch 148-pin stamp hole expansion interface
    - 8 x Serial ports
    - 5 x I2C
    - 4 x SPI
    - 16 x ADC
    - 2 x USB Host or 1 x USB Host plus 1 x USB OTG
    - 2 x SDIO
    - 1 x RGMII
    - 2 x CAN
    (only for STM32MP153 and STM32MP157)
    - 5 x LPTIM and 10 TIM

    1 x RGB Interface (supports 16-/18-/24-bit, resolution up to 1366 x 768 @60fps)
    - Up to 109 x GPIOs

    Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and pin-out description file.

The MYD-YA15XC-T Development Board Base Board

  • 1 x Power Jack
  • 1 x Debug UART (USB Type-C connector)
  • 2 x USB2.0 Host port
  • 1 x USB Type-C DRP
  • 1 x 10/100/1000 Mbps Ethernet interface (RJ45)
  • 1 x Micro SD card slot
  • 1 x Camera Interface (0.5mm pitch 30-pin FPC connector)
    Supports MYIR’s MY-CAM011B Camera Module through J12
  • 1 x CSI Signal Interface (J12, 2.54mm 2*10-pin male expansion header)
  • 1 x LCD Interface (0.5mm pitch 50-pin FPC connector, supports resolution up to 1366 x 768 @60fps)
    Supports MYIR’s MY-LCD70TP-C LCD Module with Capacitive Touch Screen through the LCD interface
    Supports MYIR’s MY-RGB2HDMI Module through the LCD interface to extend HDMI output function
  • 1 x RPI Interface (J15, 2.54mm 2*20-pin male expansion header)
    - 2 x SPI
    - 2 x UART
    - 2 x I2C
    - 1 x CAN
    - 1 x SAI
    Supports MYIR’s MY-WIREDCOM RPI Module through J15 to extend CAN, RS485 and RS232 functions
  • 1 x 2.54mm 2*10-pin male expansion header (J17)
    - 2 x USB
    - 2 x ADC
    - GPIOs
  • 1 x 2.54mm 2*10-pin male expansion header (J19)
    - 1 x SDIO
    - 2 x UART
    Supports MYIR’s MY-WF005S WiFi/BT Module through the J19
  • 2 x LEDs (one for power indicator and one for system running indicator)
  • 1 x RTC batter holder (1.25mm pitch 2-pin connector)
  • 3 x Buttons (one for Power On/Off, one for Reset and one for USER)
  • 1 x RGB/TP Extension Interface (J14, 2.54mm 2*25-pin male expansion header)

OS Support

  • Linux 5.4.31

Other MYIR's ST Products

http://www.myirtech.com/stseries.asp

MYD-YA157C Development Board (MYC-YA157C CPU Module as core board)



Hardware Specification

The MYC-YA15XC-T CPU Module is using STMicroelectronics STM32MP151AAC3 Microprocessor with 12 x 12 mm, 0.5 mm pitch, TFBGA361 package which is among the STM32MP1 Series. The STM32MP1 series is based on a heterogeneous single or dual Arm Cortex-A7 and Cortex-M4 cores architecture, strengthening its ability to support multiple and flexible applications, achieving the best performance and power figures at any time. The Cortex-A7 core provides access to open-source operating systems (Linux/Android) while the Cortex-M4 core leverages the STM32 MCU ecosystem. It is available in 3 different lines which are pin-to-pin compatible:

  • STM32MP157: Dual Cortex-A7 cores @ 650 MHz, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD
  • STM32MP153: Dual Cortex-A7 cores @ 650 MHz, Cortex-M4 core @ 209 MHz and CAN FD
  • STM32MP151: Single Cortex-A7 core @ 650 MHz, Cortex-M4 core @ 209 MHz
    Each line comes with a security option (cryptography & secure boot)


STM32MP1 Series Processsors



STM32MP15X Block Diagram


MYC-YA15XC-T CPU Module Function Block Diagram



MYD-YA15XC-T CPU Module Function Block Diagram


MYC-YA15XC-T CPU Module Dimension Chart



MYB-YA15XC-T Base Board Dimension Chart






Software Features

The MYC-YA15XC-T CPU Module is running Linux with provided 5.4.31 kernel and many drivers in source code.

Item

Features

Description

Source Code

Bootstrap program

TF-A-2.2

Arm Trusted Firmware

YES

Bootloader

U-boot-2020.01

Kernel bootstrap

YES

Linux kernel

Linux-5.4.31

Customized based on ST kernel_5.4.31 version for MYD-YA15XC-T

YES

Drivers

NAND

Nand Flash driver

YES

MMC

eMMC driver

YES

USB Host

USB Host driver

YES

USB OTG

USB OTG driver

YES

I2C

I2C driver

YES

SPI

SPI driver

YES

Ethernet

10M/100M/1000M Ethernet driver

YES

RS232/RS485/Uart

Serial driver

YES

LCD

LCD driver, supports MYIR’s 7-inch LCD with 800 x 480 pixels resolution

YES

Touch

Capacitive touch screen driver

YES

RTC

RTC driver

YES

GPIO key

Key driver

YES

GPIO LED

LED driver

YES

CAN

CAN Bus driver

YES

HDMI

HDMI driver

YES

WiFi & BT

WiFi/BT driver (SDIO)

YES

File system

myir-image-full

Full-featured file system with MEasy HMI V2.0

YES

myir-image-core

Simplified system with core features

YES

Tools

STM32CubeProgrammer

ST programmer software

BIN

STM32CubeMX

ST configuration integration tool

BIN

STM32CubeIDE

ST development tool

BIN

Applications

GPIO LED

LED example

YES

GPIO KEY

KEY example

YES

NET

TCP/IP Socket C/S example

YES

RTC

RTC example

YES

RS232

RS232 example

YES

RS485

RS485 example

YES

CAN

CAN example

YES

LCD

LCD Display example

YES

Camera

Camera Display example

YES

UART

UART example

YES

HMI 2,0

MYiR-MEasy_hmi 2.0

YES

Compiler Tool Chain

Cross compiler

arm-ostl-linux-gnueabi-gcc 9.3.0

BINARY

Yocto Project™

Yocto

Dunfell 3.1

YES



















































MYD-YA15XC-T Software Features


Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.


1 MYC-YA15XC-T CPU Module Overview 869 KB
2 ST STM32MP15X Datasheet 3.44 MB
3 MYC-YA15XC-T User Mnaual 1.08 MB
4 MYD-YA15XC-T Development Board Overview
1.04 MB


MYD-YA15XC-T Development Board Top-view



MYD-YA15XC-T Development Board Bottom-view






Price and Ordering

Item

Part No.

Packing List

Unit Price

Ordering

MYD-YA15XC-T

Development Board


MYD-YA151C-4E512D-65-I-T

- One MYD-YA15XC-T board
(including MYC-YA15XC-T)
- One USB Type-C cable
- One 5V/2A Power adapter
- One DC power jack adapter
- One Quick Start Guide

USD79

MYD-YA151C-256N256D-65-I-T

USD69


MYC-YA151C-4E512D-65-C-T
One MYC-YA151C-T Module
USD27
MYC-YA151C-4E512D-65-I-T
One MYC-YA151C-T Module
USD31
MYC-YA151C-256N256D-65-I-T

One MYC-YA151C-T Module

USD22
MYC-YA151C-256N256D-65-C-T
One MYC-YA151C-T Module
USD20

MY-RGB2HDMI

RGB to HDMI Module

MY-RGB2HDMI RGB to HDMI Module USD19

MY-WIREDCOM

RPI Module

MY-WIREDCOM

RPI Module for extension

of RS232/RS485/CAN

USD25

MY-WF005S

WiFi/BT Module

MY-WF005S
WiFi/Bluetooth Module USD19

MY-CAM011B

Camera Module

MY-CAM011B Camera Module USD25

MY-TFT070CV2
7-inch LCD Module

with capacitive touch screen

USD89

Note:

1. One MYD-YA15XC-T Development Board includes one CPU module MYC-YA15XC-T mounted on the base board. If you need more CPU module, you can order extra ones.

2. Discount is available for mass orders. Please contact MYIR for inquiries.

3. We accept custom design based on the MYD-YA15XC-T, whether reducing, adding or modifying the existing hardware according to customer’s requirement.


 

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: sales@myirtech.com or myirtech@yahoo.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2020 all rights reserved.
myirtech_facebook myirtech_Twitter myirtech_linkedin myirtech_youtube