Shopping Cart | 中文网站
 
 

Development Boards

MYD-IMX28X Freescale Series (1)

MYD-AM335X TI Series (1)

MYD-AM335X-Y TI Series (1)

MYD-AM335X-J TI Series (1)

MYD-SAMA5D3X Atmel Series (5)

MYD-SAMA5D3X-C Atmel Series (1)

MYD-SAM9X5 Atmel Series (5)

MYD-SAM9X5-V2 Atmel Series (5)

MYD-LPC435X NXP Series (2)

MYD-LPC185X NXP Series (2)

MYD-LPC1788 NXP DevKit (1)

CPU Modules

MYC-IMX28X Freescale Series (1)

MYC-AM335X TI Series (1)

MCC-AM335X-Y TI Series (1)

MCC-AM335X-J TI Series (1)

MYC-SAMA5D3X Atmel Series (5)

MCC-SAMA5D3X-C Atmel Series (1)

MYC-SAM9X5 Atmel Series (5)

MYC-SAM9X5-V2 Atmel Series (5)

MYC-S5PV210 (1)

MYC-Exynos4412 (1)

Single Board Computers

Z-turn Xilinx Zynq-7010 Board (1)

MYS-SAM9G45 Atmel SBC (1)

MYS-SAM9X5 Atmel Series (5)

MYS-S5PV210 Samsung SBC (1)

Add-on Options

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-CAM001U Camera Module (1)

MY-CU005U 3G Module (1)

MY-WF003U WiFi Module (1)

MY-GPS008C GPS Module (1)

MY-GPRS007C GPRS Module (1)

MY-SODIMM200 Socket (1)

MY-ZB010C ZigBee Module (1)

MY-ZB010C-E ZigBee EVM (1)

    Product Updates
          Products >  Development Boards >  MYD-SAM9X5-V2 Atmel Series > MYD-SAM9X5-V2 Development Board
 
MYD-SAM9X5-V2 Development Board

MYD-SAM9X5-V2 Development Board

- MYC-SAM9X5-V2 CPU Module as Controller Board
- Two 2.0mm pitch 70-pin Connectors for Connections
- 400MHz Atmel AT91SAM9X5 Series ARM926EJ-S Processors
- 128MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM
- Up to Six Serial Ports, Three USB, Two RS485, SD, Audio, JTAG
- Two Ethernet for SAM9X25
- One CAN for SAM9X25 and SAM9X35
- 4.3 or 7 inch LCD/TSP for SAM9G15/9G35/9X35
- Optional 3G, Digital Camera, WiFi and GPS Modules
- Ready-to-Run Linux 2.6.39 and Android 2.3.5
- Complete MDK-ARM Sample Codes
 


Description

The MYD-SAM9X5-V2 Development Board series is another release of an evaluation platform for Atmel AT91SAM9G15, SAM9G25, SAM9G35, SAM9X25 and SAM9X35 ARM926EJ-S processors which is capable of working at up to 400MHZ. The board is also using a CPU module plus base board design. It is a Linux and Android ready-to-run evaluation platform and also provided with complete sample codes bundle for the peripherals using Keil's MDK-ARM to enhance debugging capabilities for non-OS development. 4.3- and 7-inch LCD panels are add-on options for the SAM9G15, SAM9G35 and SAM9X35 evaluation kit. It can work in harsh environment supporting -40 to +85°C extended temperature operation. MYIR also offers USB 3G module, USB camera module, USB WiFi module and GPS module as add-on options which have greatly enhanced the functions of the development board.


MYD-SAM9X5-V2 Development Board


MYD-SAM9X5-V2 Development Board with 7-inch LCD Module (including touch screen)


The CPU module MYC-SAM9X5-V2 is connected with the base board through two 2.0mm pitch 70-pin connectors. It has 128MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Ethernet PHY on board and the base board carries out interfaces including up to six serial ports, three USB ports, Ethernet, LCD, CAN, RS485, Audio, etc.


MYC-SAM9X5-V2 CPU Module Top-View


MYC-SAM9X5-V2 CPU Module Bottom-view



The MYD-SAM9x5-V2 Development Board series have following models:

MYD-SAM9G15-V2 Development Board (based on Atmel AT91SAM9G15) using MYC-SAM9G15-V2 as CPU Module

MYD-SAM9G25-V2 Development Board (based on Atmel AT91SAM9G25) using MYC-SAM9G25-V2 as CPU Module

MYD-SAM9G35-V2 Development Board (based on Atmel AT91SAM9G35) using MYC-SAM9G35-V2 as CPU Module

MYD-SAM9X25-V2 Development Board (based on Atmel AT91SAM9X25) using MYC-SAM9X25-V2 as CPU Module

MYD-SAM9X35-V2 Development Board (based on Atmel AT91SAM9X35) using MYC-SAM9X35-V2 as CPU Module




The five models are with the same base board and different five CPU modules. But actually the MYC-SAM9X5-V2 series CPU Modules are sharing the same circuit design with minor configuration settings for five processors: SAM9G15, SAM9G25, SAM9G25, SAM9X25 and SAM9X35.


The MYD-SAM9X5-V2 development board comes along with software package, detailed documents in one DVD as well as some necessary cable accessories to provide a quick evaluation kit for you to start your development right away once get the goods out-of-the-box. It is a low-cost full-featured development board can be used for a variety of applications such as industrial controls, medical equipment, automation, portable data terminals, biometric security systems, test and measurement instruments, etc.


Product Features

Processor

  • Atmel AT91SAM9G15, SAM9G25, SAM9G35, SAM9X25 and SAM9X35
    - 400MHz ARM926-based embedded microprocessor unit
    - 16KB data Cache,16KB instruction Cache, MMU
    - On-chip: 32KB SRAM, 64KB ROM
Memory and storage
  • 128MB DDR2 SDRAM, 256MB NandFlash, 4MB DataFlash, 64KB EEPROM
  • 1 x Micro SD Card slot

Peripheral Interfaces

  • Serial port
    - Two 3-wire RS232 serial ports
    - Two 5-wire RS232 serial ports
    - Two 5-wire extended RS232 serial ports
    - Two RS485 serial ports (multiplexed with USART0 and USART3)
    - One Mini USB Debug port
  • 1 x CAN (only available on MYD-SAM9X25/X35-V2)
  • USB
    - 1 x High-speed USB 2.0 Host port
    - 1 x Full-speed USB 2.0 Host port
    - 1 x High-speed Mini USB 2.0 OTG port (configured as USB Device by default)
  • 10/100Mbps Ethernet
    -
    MYD-SAM9G15-V2 doesn’t support Ethernet
    -
    MYD-SAM9X25-V2 supports two Ethernet ports
    -
    MYD-SAM9G25/G35/X35-V2 support one Ethernet port
  • LCD interface (MYD-SAM9G15/G35/X35-V2 support 4.3"/7" TFT LCD Module)
  • Audio input port
  • Audio output port
  • 20-pin standard JTAG interface
  • Three expansion interfaces

OS support and Sample Codes

  • Linux 2.6.39
  • Andriod 2.3.5
  • MDK-ARM example code

Mechanical Parameters

  • Dimensions:
    - Base board: 177mm x 106mm
    -
    CPU Module (MYC-SAM9X5-V2): 72mm x 50mm
  • PCB layers:
    - Base board: 4-layer design
    - CPU Module (MYC-SAM9X5-V2): 6-layer design
  • Working Temp.: 0~70 Celsius (commercial level) or -40~85 Celsius (industrial level)
    Note: Our products are delivered of commercial grade (0~70 Celsius) by default.  Anyhow the MYD-SAM9X5-V2 board based on Atmel ARM9 processor can work for industrial applications working in harsh environment with working temperature ranging from -40 Celsius to 85 Celsius.  Please contact us for price and availability of products of industrial grade if you needed.
  • Power supply: 12V/1.25A



Hardware Specification

The Atmel® SAM9G and SAM9X embedded MPUs are high-performance, highly integrated processors built the good foundation of the Atmel® ARM926-based embedded MPU line. Running at 400 MHz, they are designed to complement the power of the ARM926 core; these flexible devices deliver a rich combination of peripherals including up to two Ethernet, two CAN, three USB ports and seven UARTS. Additional features include an integrated soft modem, TFT LCD controller and LPDDR/DDR2 memory support. A multilayer bus matrix architecture and multiple DMA channels ensure uninterrupted data transfer with minimum processor intervention. Low voltage, low power consumption and reduced system cost make these devices ideal for cost-sensitive machine-to-machine applications.

The MYD-SAM9X5-V2 series development boards include one CPU module mounted on one base board. It takes full features of the Atmel SAM9G and SAM9X processors and is characterized as in below table:

Item

MYD-SAM9G15-V2

MYD-SAM9G25-V2

MYD-SAM9G35-V2

MYD-SAM9X25-V2

MYD-SAM9X35-V2

Processor

AT91SAM9G15

AT91SAM9G25

AT91SAM9G35

AT91SAM9X25

AT91SAM9X35

CPU Module

MYC-SAM9G15-V2

MYC-SAM9G25-V2

MYC-SAM9G35-V2

MYC-SAM9X25-V2

MYC-SAM9X35-V2

- 400MHz Atmel AT91SAM9G15, 9G25, 9G35, 9X25 and 9X35 ARM926EJ-S Processors
-
CPU internal 32KB of SRAM and 64KB of ROM
- On-board 128MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM
- On-board Ethernet PHY
- Two 2.0mm pitch 70-pin connectors

Dimensions

CPU Module – 72 x 50mm; Base board – 177 x 106mm

PCB Layer

CPU Module – 6-layer design; Base board – 4-layer design

Power Supply

12V/1.25A

Working Temp.

0~70 Celsius or -40~85 Celsius

Storages

One Micro SD card slot

Serial ports

5

6

6

5

5

USB

One Mini USB Debug port
One High-speed USB 2.0 Host port
One Full-speed USB 2.0 Host port
One High-speed Mini USB 2.0 OTG port (configured as USB Device by default)

Ethernet

0

1 (J11)

1 (J11)

2 (J10 & J11)

1 (J11)

CAN

0

0

0

1

1

RS485

1

2

1

2

1

Note: multiplexed with USART0, USART3

Audio

Audio input/output port

LCD/TSP

Support

Not support

Support

Not support

Support

Supports 24-bit true color TFT LCD, resolution up to 800 x 600 pixels
4-line resistive touch screen
4.3-inch LCD for option (including Touch screen, with resolution 480 x 272 pixels)
7-inch LCD for option (including Touch screen, with resolution 800 x 480 pixels)

JTAG

20-pin standard JTAG interface

RTC

Battery backed RTC socket (CR1220 is recommended)

Buttons

One Reset button, One Wakeup button and Two User buttons

LED

Two Power indicators (Red, one on CPU Module and one on base board)
One user LED (Blue, on CPU Module)

Expansion Interface

Three expansion interfaces (J3, J5 and J17) brings out I2C, SPI, GPIO, etc.

Note: The resources brought out from the expansion interfaces may be multiplexed with others. Please refer to the product user manual and schematics for details for your development.


MYD-SAM9X5-V2 Block Diagram


Dimension Chart

Software Features

The MYD-SAM9X5-V2 is a Linux and Android ready-to-run development board. MYIR offers software packages along with the board. Many peripheral drivers are provided in source code to help customers quickly start their own development and create their own applications. The board is also provided with sample codes bundle for the peripherals using Keil's MDK-ARM. The software features are summarized as below:


OS

Item

Features

Description

Linux

Boot

Boot Strap

First boot program (source code available)

u-boot

Secondary boot program (source code available)

Boot Mode

Boot Linux from NAND Flash

Image update

Support programming kernel image into Nand Flash through USB

File system update

Support programming file system into Nand Flash through USB

Kernel

Version

Linux 2.6.39 (source code available)

File system

Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS

File system

Format

UBIFS file system

Drivers

USB Host, USB Device, Ethernet, MMC/SD, CAN, RS485, NandFlash, TWI (I2C), SPI, WM8904 (Audio), LCD Controller, RTC, Touch-Screen, PWM, UART, LED
(source code available)

Graphical Library

QT

Already ported (source code available)

Android

Kernel

Version

Android 2.3.5

Drivers

Ethernet, Serial port driver (USART1, DBGU),

USB (USB_HOST*2,USB_OTG), SD card driver (Micro SD, MMC/SD),

SMD, SPI, TWI, DMA, LCD+touch (LCD and touch screen driver), GPIO driver

-

MDK Sample Code Bundle

Development tool

MDK-ARM 4.53

Sample code

getting-started, adc_adc10, adc_touchscreen, can, dma, lcd, periph_protect, pmc_clock_switching, pwm, ssc_dma_audio, twi_eeprom, usart_serial, emac0, emac1, hsmci_multimedia_card, hsmci_sdcard, smc_nandflash, spi_serialflash, usb_audio_looprec, usb_cdc_serial, usb_core, usb_hid_keyboard, usb_hid_mouse, usb_hid_msd, usb_hid_transfer, usb_iad_cdc_cdc, usb_iad_cdc_hid, usb_iad_cdc_msd, usb_massstorage, RS485, External GPIO, External UART, External RTC







Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.


1 ATMEL SAM9G15 Datasheet 8.02 MB
2 ATMEL SAM9G25 Datasheet 5.84 MB
3 ATMEL SAM9G35 Datasheet 8.27 MB
4 ATMEL SAM9X25 Datasheet 7.6 MB
5 ATMEL SAM9X35 Datasheet 8.6 MB
6 MYD-SAM9X5-V2 Development Board Overview 747 KB
7 MYC-SAM9X5-V2 CPU Module Overview 668 KB
8 Build Linux Environment Based on Virtualbox 1.77 MB


MYD-SAM9X5-V2 Development Board


MYC-SAM9X5-V2 CPU Module (Controller Board of MYD-SAM9X5-V2)




MYD-SAM9X5-V2 Development Board with 4.3-inch LCD Module (including touch screen)



MYD-SAM9X5-V2 Development Board with 7-inch LCD Module (including touch screen)



Price and Ordering

Item

Part No.

Unit Price

Ordering

MYD-SAM9G15-V2 Development Board

MYD-SAM9G15-V2

USD239

MYD-SAM9G25-V2 Development Board

MYD-SAM9G25-V2

USD239

MYD-SAM9G35-V2 Development Board

MYD-SAM9G35-V2

USD239

MYD-SAM9X25-V2 Development Board

MYD-SAM9X25-V2

USD239

MYD-SAM9X35-V2 Development Board

MYD-SAM9X35-V2

USD239

4.3 inch LCD Module with touch screen (optional)

MY-LCD43TP

USD60

7 inch LCD Module with touch screen (optional)

MY-LCD70TP

USD99

MY-CAM001U Camera Module (optional)
MY-CAM001U
USD29

MY-CU005U 3G Module (optional)
MY-CU005U
USD69

MY-WF003U WiFi Module (optional)
MY-WF003U
USD25

Note:

1. One MYD-SAM9X5-V2 Development Board includes one CPU module MYC-SAM9X5-V2 mounted on the base board. If you need more CPU module, you can order extra ones.


2. Discount is available for mass orders. Please contact MYIR for inquiries.


3. All prices above are for boards of commercial grade (0~70 Celsius). If customer needs boards of industrial grade (-40~85 Celsius), please inquiry MYIR for availability and prices.


4. We accept custom design based on the MYD-SAM9X5-V2, whether reducing, adding or modifying the existing hardware according to customer’s requirement.


Packing List

NO. Item Qty Description
1 MYD-SAM9X5-V2 board 1pc MYD-SAM9G15-V2/MYD-SAM9G25-V2/MYD-SAM9G35-V2/
MYD-SAM9X25-V2/MYD-SAM9X35-V2
2 Power adapter 1pc 12V/1.25A Power adapter
3 Ethernet cable 1pc
4 USB Cable 1pc
5 Serial cable 1pc DB9 to DB9
6 DVD 1pc user manual, schematic in PDF format, datasheet, software package


 

Room 1306, Wensheng Center, Wenjin Plaza, North Wenjin Road, Luohu District, Shenzhen, China 518020
E-mail: sales@myirtech.com or myirtech@yahoo.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2014 all rights reserved.