Shopping Cart | 中文网站
 
 

Development Environment

Xilinx SDSoC (1)

Solutions

MYD-Y6ULX-CHMI (i.MX 6UL/6ULL) (1)

MY-EVC5100S-HMI (TI AM335x) (1)

FZ5 EdgeBoard AI Box (Xilinx ZU5EV) (1)

Single Board Computers

MYS-6ULX (NXP i.MX 6UL/6ULL) (2)

MYS-8MMX-V2 (i.MX 8M Mini) (1)

MYS-8MMX (NXP i.MX 8M Mini) (1)

Rico Board (TI AM437x) (1)

FZ5 Card (Xilinx ZU5EV) (1)

FZ3 Card (Xilinx ZU3EG) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

Z-turn Lite (Xilinx Zynq-7010) (1)

MYS-SAM9X5 (Atmel SAM9X5) (1)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

CPU Modules

MYC-YT507H (ALLWINNER T507H) (1)

MYC-Y7Z010/20 (Zynq-7010/20) (1)

MYC-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYC-C7Z010/20 (Zynq-7010/20) (1)

MYC-C7Z015 (Xilinx Zynq-7015) (1)

MYC-CZU3EG/4EV/5EV (Xilinx) (1)

MYC-YA15XC-T (ST STM32MP151A) (1)

MYC-YA157C (ST STM32MP157A) (1)

MYC-J1028X (NXP LS1028A) (1)

MYC-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYC-C8MMX-V2 (i.MX 8M Mini) (1)

MYC-C8MMX (NXP i.MX 8M Mini) (1)

MYC-JX8MPQ (NXP i.MX 8M Plus) (1)

MYC-JX8MX (NXP i.MX8M) (1)

MYC-IMX28X (NXP i.MX28) (1)

MCC-AM335X-J (TI AM335x) (1)

MYC-AM335X (TI AM335x) (1)

MCC-AM335X-Y (TI AM335x) (1)

MYC-C335X-GW (TI AM335x) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-C437X (TI AM437x) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAMA5D3X (Atmel A5D3) (1)

MYC-SAM9X5-V2 (Atmel SAM9X5) (1)

MYC-SAM9X5 (Atmel SAM9X5) (1)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

MYC-Exynos4412 (Samsung) (1)

Development Boards

MYD-YT507H (ALLWINNER T507H) (1)

MYD-Y7Z010/20 (Zynq-7010/20) (1)

MYD-C7Z010/20 (Zynq-7010/20) (1)

MYD-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYD-C7Z015 (Xilinx Zynq-7015) (1)

VECP Starter Kit (Xilinx ZU3EG) (1)

MYD-CZU3EG/4EV/5EV (Xilinx) (1)

MYD-YA15XC-T (ST STM32MP151A) (1)

MYD-YA157C (ST STM32MP157A) (1)

MYD-J1028X (NXP LS1028A) (1)

MYD-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYD-JX8MPQ (NXP i.MX 8M Plus) (1)

MYD-C8MMX-V2 (i.MX 8M Mini) (1)

MYD-IMX28X (NXP i.MX28) (1)

MYD-Y6ULX-HMI (i.MX 6UL/6ULL) (1)

MYD-JX8MX (NXP i.MX8M) (1)

MYD-C8MMX (NXP i.MX 8M Mini) (1)

MYD-AM335X (TI AM335x) (1)

MYD-C335X-GW (TI AM335x) (1)

MYD-AM335X-Y (TI AM335x) (1)

MYD-AM335X-J (TI AM335x) (1)

MYD-C437X (TI AM437x) (1)

MYD-C437X-PRU (TI AM437x) (1)

MYD-SAM9X5 (Atmel SAM9X5) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAMA5D3X (Atmel A5D3) (1)

MYD-SAM9X5-V2 (Atmel SAM9X5) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-LPC185X (NXP LPC185x) (2)

MYD-LPC435X (NXP LPC435x) (2)

MYD-LPC1788 (NXP LPC1788) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

Z-turn Lite IO Cape (for Z-turn Lite) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-LVDS070C LCD Module (1)

MY-WF003U USB WiFi Module (1)

MY-WF004S SDIO WiFi Module (1)

MY-WF005S WiFi/BT Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CAM003M Camera Module (1)

MY-RGB2HDMI Module (1)

MY-WIREDCOM RPI Module (1)

MY-UART012U Convertor (1)

MY-SODIMM200 Socket (1)

MYD-Y7Z010/20 IO Cape (1)

MYB-Y6ULX-HMI-4GEXP (1)

MY-CAM002U Camera Module (1)

    Product Updates
          Products >  Development Boards >  MYD-J1028X (NXP LS1028A) > MYD-J1028X Development Board
 
MYD-J1028X Development Board

MYD-J1028X Development Board

- MYC-J1028X CPU Module as Controller Board
- 1.5 GHz NXP Layerscape LS1028A Application Processor based on Dual ARM Cortex-A72 Cores
- 2GB DDR4, 8GB eMMC Flash, 32Kbit EEPROM
- 1 x USB3.0 Host, 5 x Gigabit TSN Ethernet, , 1 x WIFI Module interface, 1 x 5G Module interface
- 1 x SSD Module Interface, 1 x Micro SD Card Slot
- 1 x DP Display Interface, 1 x Audio out
- Supports Ubuntu and Real-time Edge Images based on Linux Kernel
- Optional USB Camera Module and RPI Module
 


The MYD-J1028X development board consists ofthe high-performance MYC-J1028X CPU Module and a base board to provide a complete evaluation platform for NXP LS1028A Processor which featuresdual Arm Cortex-A72 cores,with integrated 3D GPU for HMI, and a time-sensitive networking (TSN) -enabled Ethernet switch and Ethernet controllers to support converged IT and OT networks.Typical applications are industrial router, industrial control, edge computing, automotive electronics, industrial IoT and other scenes requiring high reliability, powerful communication and display capabilities.


The MYC-J1028XCPU Module is an ARM SoM with Layerscape LS1028A SoC, 2G DDR4, 8GB eMMC, 32Kbit EEPROM and a temperature sensor. It is connected to the base boardof MYD-J1028X through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. The base board has brought out rich peripherals through connectors and headers such as 5G Module interface, one M.2 Key B based SSD Module interface,one DP display port, one Audio output port, one Micro SD card slot as well as two SIM card slots and more others.

MYD-J1028X Development Board Top-view (delivered with heatsink by default)

MYD-J1028X Development Board Bottom-view

The MYD-J1028X development board is delivered with one Quick Start Guide, one Type-C cable, one 12V/2A power adapter and one DC power jack adapter to provide user a complete platform for evaluating and prototyping based on LS1028A processor. MYIR also offers MY-CAM002U USB Camera Module and MY-WIREDCOM RPI Module (RS232/RS485/CAN) as options for the board.


TheMYD-J1028X is capable of supporting Ubuntu and Real-time Edge images based on Linux kernel. Driver source code and compilation tools are provided to enable users to start their development rapidly and easily.


Features

Mechanical Parameters

  • Dimensions: 200mm x 150mm (base board), 45mm x 82mm (CPU Module)
  • PCB Layers: 4-layer design (base board), 12-ayer design (CPU Module)
  • Power supply: 12V/2A (base board), 5V/2A (CPU Module)
  • Working temperature: -40~85 Celsius

The MYD-J1028X Controller Board (MYC-J1028X CPU Module)


MYC-J1028X CPU Module Top-view


MYC-J1028X CPU Module Bottom-view

Processor

  • NXP Layerscape LS1028A Dual-core Processor
    - 1.5 GHz Dual-core ARM Cortex-A72 CPU (LS1028AXN7PQA, industrial grade)
    - Integrated TSN Ethernet switches and Ethernet controllers
    - Integrated GPU and LCD controller

Memory

  • 2G DDR4 (supports optional 3GB / 4GB DDR4)

  • 8GB eMMC (supports optional 16GB / 32GB eMMC)

  • 32Kbit EEPROM

  • QSPI Nand Flash (DNP by default)

  • XSPI NOR Flash (DNP by default)

Peripherals and Signals Routed to Pins

  • Temperature Sensor

  • 0.5mm pitch 314-pin MXM 3.0 Gold-finger-edge-card Connector
    - 1 x SGMII signal
    - 1 x QSGMII signal
    - 2 x PCIe 3.0
    - 1 x SATA 3.0
    - 2 x CAN-FD
    - 2 x USB3.0
    - 8 x I2C
    - 3 x SPI
    - 2 x SDIO
    - 2 x UART
    - 6 x LPUART
    - 1 x DP1.3/eDP1.4 (supports 4K@60fps)
    - 1 x JTAG
    - 6 x SAI
    - GPIOs

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet and CPU Module pin-out description file.


The MYD-J1028X Development Board Base Board (MYB-J1028X)

MYD-J1028X Development Board Base Board

  • 1 x Power Jack
  • 1 x Power Switech
  • Serial ports
    - 1 x Debug UART (TTL, USB Type-C connector)
    - 2 x TTL serial ports (brought out from expansion header)
  • USB
    - 1 x USB 3.0 Host port
    - 1 x USB 3.0 based M.2 Key B 5G Module interface (J10)
  • 2 x SIM card slots
  • 5 x 10/100/1000 Mbps TSN Ethernet interfaces (RJ45)
  • 1 x M.2 Key E PCIe 3.0 based WiFi module interface (J14)
  • 1 x M.2 Key B SATA 3.0 based SSD Module interface (J13)
  • 1 x Micro SD card slot
  • 1 x DP Display port (supports DP1.3 and eDP1.4, resolution up to 4K@60FPS)
  • 1 x 3.5mm Audio Output interface
  • 1 x 2.54mm 2 x 20-pin male expansion header
    (J18, GPIO/I2C/SPI/UART/CAN, compatible with Raspberry PI standard 40-pin extension interface)
    Supports MYIR’s MY-WIREDCOM RPI Module through J18 to extend RS485, RS232 and CAN functions
  • 2 x Buttons (one for Reset and one for USER)
  • 1 x LED (Power on indicator: Green)

OS Support

  • Linux 5.4.47 (Ubuntu 18.04)
  • Linux 5.10.9 (Yocto3.2.1, Real-time Edge Image)


Hardware Specification

The MYC-J1028X CPU Module is using NXP’s 17 x 17 x 2.46mm, 0.75mm pitch, FBGA448 of fine-pitch ball grid array package Layerscape LS1028A dual-core application processor (LS1028AXN7PQA). The LS1028A processor is equipped with TSN-enabled Ethernet switches and Ethernet controllers to support converged IT and OT networks. Two 64-bit Arm v8 cores provide industrial-controlled real-time processing and virtualization support for IoT edge computing. Integrated GPU and LCD controllers enable human-machine interface (HMI) systems to support new high-speed interfaces.

The main features of Layerscape LS1028A processor are as follows:

  • Dual Arm v8 Processors for Industrial Applications
  • 4 port Time-Sensitive Networking enabled switch
  • 2 Time-Sensitive Networking-capable Ethernet controllers
  • GPU and LCD Controller
  • Configurable cryptographic offload engines
  • Integrated trust architecture
  • PCI Express
  • CAN Bus

  • Layerscape LS1028A Block Diagram



MYC-J1028X CPU Module Block Diagram



MYD-J1028X Development Board Block Diagram



Dimensions of MYC-J1028X CPU Module



Dimensions of MYD-J1028X Development Board (Unit: MM)


Software Features

MYIRs MYC-J1028X CPU module is ready to run Linux which is provided with software package. Many peripheral drivers are in source code to help accelerate customers designs. The software package provided is characterized as following:


Item

Features

Description

Source Code Provided

Bootstrap program

RCW

Initializing system clocks, PIN MUX

YES

ATF

Switching between secure and unsafe environments, DDR initialization

YES

uboot

u-boot 2020.04

YES

Linux kernel

Image

Customized based on official Kernel_5.4.47 (Ubuntu)

YES

Custom based on official Kernel 5.10.9 (Edge)

YES

Drivers

MMC

eSDHC driver

YES

SPI

SPI driver

YES

I2C

I2C driver

YES

USB Host

USB driver

YES

Ethernet

Gigabit Ethernet driver

YES

DSA Switch

Switch driver

YES

TSN

TSN driver

YES

XPSI

XPSI driver

YES

UART

Serial driver

YES

CAN

CAN driver

YES

GPIO

GPIO driver

YES

RTC

RTC driver

YES

SATA

SATA driver

YES

PCIE

PCIE driver

YES

SAI

SAI driver

YES

DP

DP driver

YES

File System

Ubuntu

Ubuntu file system built on LSDK 20.12

YES

myir-image-full

Edge file system built on Yocto 3.2.1

YES

Compiler Tool Chain

Cross compiler

aarch64-linux-gnu-gcc

BINARY







Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.


1 MYC-J1028X CPU Module Overview 2.44 MB
2 NXP LS1028A Data Sheet 1.50 MB
3 MYD-J1028X Development Board Overview
1.15 MB

MYD-J1028X Development Board


MYC-J1028X CPU Module Top-view


MYC-J1028X CPU Module Bottom-view


MYD-J1028X Development Board Base Board



MYD-J1028X Development Board Bottom-view

Price and Ordering

Item

Part No.

Packing List

Unit Price

Ordering

MYD-J1028X
Development Board


MYD-J1028N-8E2D-150-I


- One MYD-J1028X board
(including MYC-J1028X CPU Module)

- One USB Type-A to Type-C cable
- One 12V/2A Power adapter
- One DC power jack adapter
- One Quick Start Guide

USD279

MYC-J1028X

CPU Module

MYC-J1028N-8E2D-150-I

One MYC-J1028X Module

USD179

MY-CAM002U
USB Camera Module

MY-CAM002U USB Camera Module USD19

MY-WIREDCOM

RPI Module

MY-WIREDCOM
RPI Mofule for extension

of RS232/RS485/CAN

USD25

Note:

1. One MYD-J1028X Development Board includes one CPU module MYC-J1028X mounted on the base board. If you need more CPU module, you can order extra ones.

2. Discount is available for mass orders. Please contact MYIR for inquiries.

3. We accept custom design based on the MYD-J1028X, whether reducing, adding or modifying the existing hardware according to customer’s requirement.








 

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: sales@myirtech.com or myirtech@gmail.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2022 all rights reserved.
myirtech_facebook myirtech_Twitter myirtech_linkedin myirtech_youtube