Solutions

MYD-LR3568-GK-B IPC Box (RK3568) (1)

FZ5 EdgeBoard AI Box (Xilinx ZU5EV) (1)

Single Board Computers

MYS-6ULX (NXP i.MX 6UL/6ULL) (1)

MYS-8MMX-V2 (i.MX 8M Mini) (1)

Rico Board (TI AM437x) (1)

FZ5 Card (Xilinx ZU5EV) (1)

FZ3 Card (Xilinx ZU3EG) (1)

Z-turn Board (Xilinx Zynq-7010/20) (1)

Z-turn Board V2 (Zynq-7010/20) (1)

Z-turn Lite (Xilinx Zynq-7010) (1)

Remi Pi (Renesas RZ/G2L) (1)

MYD-LT527-SX (Allwinner T527) (1)

System-On-Modules (SOMs)

MYC-LR3568 (Rockchip RK3568) (1)

MYC-LR3576 (Rockchip RK3576) (1)

MYC-YT113i (Allwinner T113-i) (1)

MYC-YT507H (Allwinner T507-H) (1)

MYC-LT527 (Allwinner T527) (1)

MYC-YT113X (Allwinner T113-S3) (1)

MYC-YG2UL (RENESAS RZ/G2UL) (1)

MYC-YG2LX (RENESAS RZ/G2L) (1)

MYC-C7Z015 (Xilinx Zynq-7015) (1)

MYC-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYC-C7Z010/20-V2 (Z-7010/20) (1)

MYC-J7A100T (XC7A100T Artix-7) (1)

MYC-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYC-YF13X (ST STM32MP135) (1)

MYC-YA15XC-T (ST STM32MP151) (1)

MYC-YA157C-V3 (ST STM32MP157) (1)

MYC-LD25X (ST STM32MP257) (1)

MYC-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYC-C8MMX-V2 (i.MX 8M Mini) (1)

MYC-JX8MX (NXP i.MX8M) (1)

MYC-JX8MMA7 (8M Mini+Artix-7) (1)

MYC-J1028X (NXP LS1028A) (1)

MYC-JX8MPQ (NXP i.MX 8M Plus) (1)

MYC-LMX9X (NXP i.MX93) (1)

MYC-YM62X (TI AM62x) (1)

MYC-C437X-V2 (TI AM437x) (1)

MYC-IMX28X (NXP i.MX28) (1)

MYC-J335X-V2 (TI AM335x) (1)

MYC-Y335X-V2 (TI AM335x) (1)

MYC-C335X-V4 (TI AM335x) (1)

MYC-C335X-GW (TI AM335x) (1)

MYC-JD9360 (SemiDrive D9-Pro) (1)

MYC-SAMA5D3X (Atmel A5D3) (1)

MYC-LMA35 (Nuvoton MA35D1) (1)

MYC-SAM9X5 (Atmel SAM9X5) (1)

Development Boards

MYD-LR3568 (Rockchip RK3568) (1)

MYD-LR3576 (Rockchip RK3576) (1)

MYD-YT113i (Allwinner T113-i) (1)

MYD-YT113X (Allwinner T113-S3) (1)

MYD-YT507H (Allwinner T507-H) (1)

MYD-LT527 (Allwinner T527) (1)

MYD-YG2UL (Renesas RZ/G2UL) (1)

MYD-YG2LX (Renesas RZ/G2L) (1)

MYD-C7Z015 (Xilinx Zynq-7015) (1)

MYD-Y7Z010/20 (Zynq-7010/20) (1)

MYD-Y7Z010/20-V2 (Zynq-7010/20) (1)

MYD-C7Z010/20-V2 (Z-7010/20) (1)

MYD-CZU3EG/4EV/5EV-V2 (Xilinx) (1)

MYD-J7A100T (XC7A100T Artix-7) (1)

MYD-YA15XC-T (ST STM32MP151) (1)

MYD-YF13X (ST STM32MP135) (1)

MYD-YA157C-V3 (ST STM32MP157) (1)

MYD-LD25X (ST STM32MP257) (1)

MYD-Y6ULX-V2 (i.MX 6UL/6ULL) (1)

MYD-JX8MPQ (NXP i.MX 8M Plus) (1)

MYD-JX8MX (NXP i.MX8M) (1)

MYD-C8MMX-V2 (i.MX 8M Mini) (1)

MYD-JX8MMA7 (8M Mini+Artix-7) (1)

MYD-YM62X (TI AM62x) (1)

MYD-LMX9X (NXP i.MX93) (1)

MYD-J1028X (NXP LS1028A) (1)

MYD-C437X-V2 (TI AM4378) (1)

MYD-C437X-V2-PRU (TI AM437x) (1)

MYD-C335X-V4 (TI AM335x) (1)

MYD-J335X-V2 (TI AM335x) (1)

MYD-Y335X-V2 (TI AM335x) (1)

MYD-C335X-GW (TI AM335x) (1)

MYD-JD9360 (SemiDrive D9-Pro) (1)

MYD-LMA35 (Nuvoton MA35D1) (1)

Add-on Options

Z-turn IO Cape (for Z-turn Board) (1)

Z-turn Lite IO Cape (for Z-turn Lite) (1)

MYB-6ULX (for MYS-6ULX) (1)

MY-LCD43TP LCD Module (1)

MY-LCD70TP LCD Module (1)

MY-LCD70TP-C LCD Module (1)

MY-LVDS070C LCD Module (1)

MY-WF003U USB WiFi Module (1)

MY-WF005S WiFi/BT Module (1)

MY-CAM002U Camera Module (1)

MY-CAM011B BUS Camera Module (1)

MY-CAM003M Camera Module (1)

MY-CAM004M Camera Module (1)

MY-CAM005M Camera Module (1)

MY-WIREDCOM RPI Module (1)

MY-SODIMM200 Socket (1)

Discontinued Products

MYC-C7Z010/20 (Zynq-7010/20) (1)

MYC-Y7Z010/20 (Zynq-7010/20) (1)

MCC-SAMA5D3X-C (Atmel A5D3) (1)

MYC-JA5D2X (Atmel A5D2) (1)

MYC-CZU3EG/4EV/5EV (Xilinx) (1)

MYC-JA5D4X (Atmel A5D4) (1)

MYC-SAM9X5-V2 (Atmel SAM9X5) (1)

MYC-Exynos4412 (Samsung) (1)

MYC-S5PV210 (Samsung S5PV210) (1)

MYD-CZU3EG/4EV/5EV (Xilinx) (1)

VECP Starter Kit (Xilinx ZU3EG) (1)

MYD-Y6ULX-CHMI (i.MX 6UL/6ULL) (1)

MYD-Y6ULX-HMI (i.MX 6UL/6ULL) (1)

MYD-IMX28X (NXP i.MX28) (1)

MYD-LPC185X (NXP LPC185x) (1)

MYD-LPC435X (NXP LPC435x) (1)

MYD-LPC1788 (NXP LPC1788) (1)

MYD-SAM9X5-V2 (Atmel SAM9X5) (1)

MYD-SAM9X5 (Atmel SAM9X5) (1)

MYD-JA5D2X (Atmel A5D2) (1)

MYD-SAMA5D3X-C (Atmel A5D3) (1)

MYD-SAMA5D3X (Atmel A5D3) (1)

MYD-JA5D4X (Atmel A5D4) (1)

MYS-8MMX (NXP i.MX 8M Mini) (1)

MYS-S5PV210 (Samsung S5PV210) (1)

MYS-SAM9G45 (Atmel SAM9G45) (1)

MYS-SAM9X5 (Atmel SAM9X5) (1)

MY-WF004S SDIO WiFi Module (1)

MY-UART012U Convertor (1)

MYD-Y7Z010/20 IO Cape (1)

MYB-Y6ULX-HMI-4GEXP (1)

MY-EVC5100S-HMI (TI AM335x) (1)

          Products >  Development Boards >  MYD-C7Z010/20-V2 (Z-7010/20) > MYD-C7Z010/20-V2 Development Board
 
MYD-C7Z010/20-V2 Development Board

MYD-C7Z010/20-V2 Development Board

- MYC-C7Z010/20-V2 CPU Module as Controller Board
- Xilinx XC7Z010/20 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
- 4GB eMMC, 32MB QSPI Flash
- 4 x USB2.0 Host, Gigabit Ethernet, CAN, HDMI, LCD, TF
- 1 x XADC, 3 x PMoD, 1 x FMC
- Optional 4.3 or 7 inch LCD/TSP
- Ready-to-Run Linux 5.4.0
 

MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products!
We also offer ODM & OEM services, welcome your inquiry!
http://www.myirtech.com/xilinxseries.asp


The MYD-C7Z010/20-V2 development board is built around the MYC-C7Z010/20-V2 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20-V2 combines the Xilinx Zynq-7010 or Zynq-7020 SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors.


The MYD-C7Z010/20-V2 development board takes full features of the Zynq-7010 and Zynq-7020 SoCs’ powerful dual-core ARM Cortex-A9 processing system and Xilinx 7-series Field Programmable Gate Array (FPGA) logic unit to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC; it has three PMoD headers to meet your I/O needs with PMoDs (only for 7020); it also has a low-pin count FMC connector to allow various FMC cards for custom I/O options. User can integrate a MYC-C7Z010-V2 or a MYC-C7Z020-V2 SOM on the same base board, thus making two variants of Zynq evaluation boards.

MYD-C7Z010-V2 Development Board – with MYC-C7Z010-V2 CPU Module for Xilinx XC7Z010

MYD-C7Z020-V2 Development Board with MYC-C7Z020-V2 CPU Module for Xilinx XC7Z020

MYD-C7Z010/20-V2 Development Board


The MYD-C7Z010/20-V2 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.


Features

Mechanical Parameters

  • Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
  • PCB layers: 4-layer design (base board), 10-layer design (CPU Module)
  • Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
  • Working temp.: 0~70 Celsius or -40~85 Celsius (industrial grade)

The MYD-C7Z010/20-V2 Controller Board (MYC-C7Z010/20-V2 CPU Module)

MYC-C7Z010/20-V2 Top-view


MYC-C7Z010/20-V2 Bottom-view

SoC

  • Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-1CLG400/XC7Z020-2CLG400 (Zynq-7020)
  • - 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
    - Integrated Artix-7 class FPGA subsystem
    with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
    with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
    - NEON™ & Single / Double Precision Floating Point for each processor
    - Supports a Variety of Static and Dynamic Memory Interfaces

Memory

  • 1GB DDR3
  • 4GB eMMC
  • 32MB QSPI Flash (16MB is optional)

Peripherals and Signals Routed to Pins

  • 10/100/1000M Ethernet PHY (YT8531SH)
  • External watchdog
  • Three LEDs
  • - One blue LED for power indicator
    - One red LED for FPGA program done indicator
    - One green user LED
  • Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
    - One Gigabit Ethernet
    - One USB OTG 2.0
    - Two Serial ports
    - Two I2C
    - Two CAN BUS
    * Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
    - Two SPI (can be implemented through PL pins)
    - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
    - One SDIO

The MYD-C7Z010/20-V2 Base Board (MYB-C7Z010/20)



PS Unit

  • Four USB 2.0 Host ports (through USB Hub)
  • One RS232 (DB9 port)
  • One TF card slot (bootable)
  • One CAN interface
  • One 10/100/1000M Ethernet
  • One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
  • Battery backed RTC
  • One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
  • Jumpers
  • - One for booting selection from TF card or QSPI
    - One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins
    - One for selection if adding FMC module to JTAG

PL Unit

  • One XADC interface
  • One Xilinx standard LPFMC interface
  • One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
  • LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
  • Two LEDs (one for FMC module detection, one for power indicator)
  • Three-channel PMoD (only for XC7Z020)

OS Support

  • Linux 5.4.0


Other MYIR's Xilinx Products

http://www.myirtech.com/xilinxseries.asp

Z-turn Board V2 Single Board Computer (based on Zynq-7010 / 7020)

Z-turn Lite Single Board Computer (based on Zynq-7010)

MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board, Zynq-7015)

MYD-Y7Z010/20-V2 Development Board (MYC-Y7Z010/20-V2 CPU Module as core board, Zynq-7010 / 7020)

MYD-CZU3EG/4EV/5EV-V2 Development Board (MYC-CZU3EG/4EG/5EV-V2 CPU Module as core board, ZU3EG/4EV/5EV)

FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)

FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)






Hardware Features

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.


The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix®-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex®-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.

ZYNQ-7000 Device Family



Zynq-7000 Devices



MYD-C7Z010/20-V2 Function Block Diagram



Dimensions of MYD-C7Z010/20-V2





Software Features

The MYD-C7Z010/20-V2 development board is preloaded with Linux 5.4.0. MYIR provides software package in product disk along with the goods delivery. The software package features as below:

Item

Features

Description

Remark

Cross compiler

gcc 9.2.0

arm-xilinx-linux-gnueabi-gcc (GCC) 9.2.0

Boot program

BOOT.BIN

First boot program including FSBL, bitstream

Source code provided

u-boot

Secondary boot program

Source code provided

Linux Kernel

Linux 5.4.0

Customized kernel for MYD-C7Z010/20-V2

Source code provided

Drivers

USB Host

USB Host driver

Source code provided

Ethernet

Gigabit Ethernet driver

Source code provided

MMC/SD/TF

MMC/SD/TF card driver

Source code provided

CAN

CAN driver

Source code provided

LCD Controller

XYLON LCD driver

Source code provided

HDMI

HDMI (SII902X chip) driver

Source code provided

Button

Button driver

Source code provided

UART

UART driver

Source code provided

LED

LED driver

Source code provided

GPIO

GPIO driver

Source code provided

QSPI

QSPI Flash S25FL256S driver

Source code provided

RTC

DS3231 RTC driver

Source code provided

Resistive Touch

TSC2007 resistive touch screen driver

Source code provided

Capacitive Touch

FT5X0X capacitive touch screen driver

Source code provided

ADC

ADC driver

Source code provided

File System

Ramdisk

Ramdisk system image

Rootfs.tar

Tar file








Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.


1 Xilinx Zynq-7000 Overview 658 KB
2 MYD-C7Z010/20-V2 Development Board Overview
887 KB

3 MYC-C7Z010/20-V2 CPU Module Overview 1.04 MB
4 MYC-C7Z010/20-V2 Expansion Connectors Pin-out description 1.14 MB
5 3D STEP file of MYC-C7Z010/20-V2 CPU Module
3.50 MB


MYC-C7Z010/20-V2 CPU Module Top-view



MYC-C7Z010/20-V2 CPU Module Bottom-view



MYD-C7Z010/20-V2 Development Board




Price and Ordering

Item

Part No.

Packing List

Unit Price

Ordering

MYD-C7Z010-V2

Development Board

MYD-C7Z010-V2-4E1D-667-C
(commercial grade)

- One MYD-C7Z010-V2 board
- One 1.5m cross Ethernet cable
- One DB9 UART to USB cable
- One HDMI cable
- One 12V/1.25A Power adapter
- One 16GB TF Card

USD139

MYD-C7Z010-V2-4E1D-667-I
(industrial grade)
USD149

MYD-C7Z020-V2

Development Board

MYD-C7Z020-V2-4E1D-766-C

(commercial grade)

- One MYD-C7Z020-V2 board
- One 1.5m cross Ethernet cable
- One DB9 UART to USB cable
- One HDMI cable
- One 12V/1.25A Power adapter
- One 16GB TF Card

USD159
MYD-C7Z020-V2-4E1D-766-I

(industrial grade)

USD179

CPU Module

MYC-C7Z010-V2-4E1D-667-C

(commercial grade)

- One MYC-C7Z010-V2 CPU Module
USD89
MYC-C7Z010-V2-4E1D-667-I

(industrial grade)

- One MYC-C7Z010-V2 CPU Module
USD99

MYC-C7Z020-V2

CPU Module

MYC-C7Z020-V2-4E1D-766-C

(commercial grade)

- One MYC-C7Z020-V2 CPU Module USD109
MYC-C7Z020-V2-4E1D-766-I

(industrial grade)

- One MYC-C7Z020-V2 CPU Module USD119

MY-TFT043RV2

4.3-inch LCD Module
with resistive touch screen

USD59

LCD Module

MY-TFT070RV2
7-inch LCD Module

with resistive touch screen

USD79
MY-TFT070CV2 7-inch LCD Module

with capacitive touch screen

USD89
USB Camera Module
MY-CAM002U USB Camera Module USD19

Note:

1. One MYD-C7Z010/20-V2 Development Board includes one CPU module MYC-C7Z010/20-V2 mounted on the base board by default. If you need more CPU module, you can order extra ones.

2. Discount is available for mass orders. Please contact MYIR for inquires.

3. The boards of commercial grade can work in temperature ranging from 0~70 Celsius. The boards of industrial grade can work in temperature ranging from -40~85 Celsius.

4. We accept custom design based on the MYD-C7Z010/20-V2, whether reducing, adding or modifying the existing hardware according to customer’s requirement.

5. Customer may have used V1 version (MYD-C7Z010/20) before, V2 version is fully compatible with V1 version but using different ethernet PHY chips.