Overview Online Support FAQ   Atmel Series  (29) TOP10   MYS-SAM9X5 (3)   MYS-SAM9G45 (1)   MYD-SAM9X5 (7)   MYD-SAM9X5-V2 (2)   MYD-JA5D2X (0)   MYD-SAMA5D3X (11)   MYD-SAMA5D3X-C (0)   MYD-JA5D4X (0)   MYC-SAM9X5 (4)   MYC-SAM9X5-V2 (1)   MYC-JA5D2X (0)   MYC-SAMA5D3X (0)   MCC-SAMA5D3X-C (0)   MYC-JA5D4X (0)   NXP Series  (23) TOP10   MYS-6ULX (4)   MYD-Y6ULX (3)   MYD-Y6ULX-HMI (1)   MYD-IMX28X (2)   MYD-LPC435X (2)   MYD-LPC185X (1)   MYD-LPC1788 (0)   MYC-Y6ULX (4)   MYC-IMX28X (0)   i.MX 6UL/6ULL (6)   TI Series  (24) TOP10   MYD-AM335X (12)   MYD-AM335X-Y (0)   MYD-AM335X-J (0)   MYD-C437X (0)   MYD-C437X-PRU (5)   Rico Board (6)   MYC-AM335X (1)   MCC-AM335X-Y (0)   MCC-AM335X-J (0)   MYC-C437X (0)   Xilinx Series  (20) TOP10   Z-turn Board (9)   Z-turn Lite (2)   MYD-C7Z010/20 (0)   MYD-C7Z015 (7)   MYD-Y7Z010/007S (0)   MYC-C7Z010/20 (0)   MYC-C7Z015 (0)   MYC-Y7Z010/007S (0)   HMI Solutions  (0) TOP10   MYD-Y6ULX-CHMI (0)   MY-EVC5100S-HMI (0)   Others  (1) TOP10   MY-WF003U (1)

Home >  Support > Xilinx Series > MYD-C7Z015   What can I do if the Boot.bin keeps loading...   Question What can I do if the Boot.bin keeps loading (red LED keeps flashing and the CPU keeps sending same string on the UART) when I put the TF card and set jumper JP2 on and JP3 OFF on MYD-C7Z015? Answer Please open the Jumper JP1 on the MYC-C7Z015 CPU Module and try again. As the CPU Module enables the watchdog by default, you can open JP1 to disable it.