Overview Online Support FAQ   Atmel Series  (29) TOP10   MYS-SAM9X5 (3)   MYS-SAM9G45 (1)   MYD-SAM9X5 (7)   MYD-SAM9X5-V2 (2)   MYD-JA5D2X (0)   MYD-SAMA5D3X (11)   MYD-SAMA5D3X-C (0)   MYD-JA5D4X (0)   MYC-SAM9X5 (4)   MYC-SAM9X5-V2 (1)   MYC-JA5D2X (0)   MYC-SAMA5D3X (0)   MCC-SAMA5D3X-C (0)   MYC-JA5D4X (0)   NXP Series  (23) TOP10   MYS-6ULX (4)   MYD-Y6ULX (3)   MYD-Y6ULX-HMI (1)   MYD-IMX28X (2)   MYD-LPC435X (2)   MYD-LPC185X (1)   MYD-LPC1788 (0)   MYC-Y6ULX (4)   MYC-IMX28X (0)   i.MX 6UL/6ULL (6)   TI Series  (24) TOP10   MYD-AM335X (12)   MYD-AM335X-Y (0)   MYD-AM335X-J (0)   MYD-C437X (0)   MYD-C437X-PRU (5)   Rico Board (6)   MYC-AM335X (1)   MCC-AM335X-Y (0)   MCC-AM335X-J (0)   MYC-C437X (0)   Xilinx Series  (20) TOP10   Z-turn Board (9)   Z-turn Lite (2)   MYD-C7Z010/20 (0)   MYD-C7Z015 (7)   MYD-Y7Z010/007S (0)   MYC-C7Z010/20 (0)   MYC-C7Z015 (0)   MYC-Y7Z010/007S (0)   HMI Solutions  (0) TOP10   MYD-Y6ULX-CHMI (0)   MY-EVC5100S-HMI (0)   Others  (1) TOP10   MY-WF003U (1)

Home >  Support > Atmel Series > MYD-SAMA5D3X   Ping request could not find Host after u-boot IP setting   Question Hello, I could not pin the Host after I set the IP in u-boot, what's the problem? Answer After burned the u-boot, please set the value for "ipaddr" and "ethaddr" two parameters, then use "saveenv" command to save the settings. Restart the board again, it can ping successfully.