MY-ZB010C-E Evaluation Module
The MY-ZB010C-E is an evaluation module (EVM) designed by
MYIR for evaluating the MY-ZB010C UART to ZigBee Module. The evaluation board is
very compact but has rich extended interfaces including power, communications
and some peripherals. Combined with the LEDs, adjustable resistors, buzzer, it
can be used for the MY-ZB010C module initial debugging, communication test,
functional evaluation, ect.
The ZBAssistX is ZigBee module configuration
software developed by MYIR, which can be used for setting or searching the configured
parameters of the MY-ZB010C module, it also has more functions like console, network
scanning and configuration import/export functions. You can download this
software from our website and operate following the user manuals included in
the product disk.
The MY-ZB010C UART to
ZigBee Module is available in two models: MY-ZB010C-S and MY-ZB010C-P. The MY-ZB010C-S is a standard power module with 2.5dBm transmit power, -95dBm
receiving sensitivity and integral antenna. The MY-ZB010C-P is a high power
module with 22dBm transmit power, -100dBm receiving sensitivity and UFL
antenna interface. The two models of MY-ZB010C ZigBee Modules are pin-to-pin compatible on the MY-ZB010C-E evaluation board, thus also make two models of MY-ZB010C-E ZigBee Evaluation Modules: MY-ZB010C-E-P and MY-ZB010C-E-S.

USD49 
MY-ZB010C-E-P Evaluation Module (for MY-ZB010C-P ZigBee Module)

USD39
MY-ZB010C-E-S Evaluation Module (for MY-ZB010C-S ZigBee Module)

MY-ZB010C-E Evaluation Module Interface Diagram
|