Shopping Cart | 中文网站
 
 
Overview
Online Support
FAQ
  Atmel Boards  (37) TOP10
  MYD-SAM9X5 (9)
  MYS-SAM9X5 (2)
  MYS-SAM9G45 (1)
  MYD-SAMA5D3X (14)
  MYD-SAM9X5-V2 (2)
  MYC-SAM9X5 (4)
  MYC-SAM9X5-V2 (1)
  MYC-SAMA5D3X (1)
  MYD-JA5D4X (3)
  NXP Boards  (13) TOP10
  MYD-LPC435X (2)
  MYD-LPC185X (1)
  MYD-LPC1788 (0)
  MYS-6ULX (3)
  MYC-Y6ULX (3)
  MYD-Y6ULX (4)
  Samsung Boards  (0) TOP10
  TI Boards  (23) TOP10
  MYD-AM335X (11)
  MYC-AM335X (1)
  Rico Board (6)
  MYD-C437X-PRU (5)
  Other  (3) TOP10
  MY-WF003U (1)
  Freescale Boards  (2) TOP10
  MYD-IMX28X (2)
  Xilinx Boards  (48) TOP10
  Z-turn Board (19)
  MYD-C7Z010/20 (17)
  MYD-C7Z015 (10)
 
  Home >  Support > Xilinx Boards > Z-turn Board
 
When I work with Z-turn Zynq-7020 board, I only use the FPGA function without using internal ARM
 
Question
When I work with Z-turn Zynq-7020 board, I only use the FPGA function without using internal ARM core. Can I program MCS file through JTAG directly?
Answer

This MCS file is a binary file generated by ISE of Xilinx. MYIR’s Zynq development board can only download the .bit file generated by the dedicated software Vivado, can’t program MCS file.

 

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: sales@myirtech.com or myirtech@yahoo.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2018 all rights reserved.
myirtech_facebook myirtech_Twitter myirtech_linkedin myirtech_youtube