Shopping Cart | 中文网站
Online Support
  Atmel Boards  (37) TOP10
  MYD-SAM9X5 (9)
  MYS-SAM9X5 (2)
  MYS-SAM9G45 (1)
  MYD-SAMA5D3X (14)
  MYD-SAM9X5-V2 (2)
  MYC-SAM9X5 (4)
  MYC-SAM9X5-V2 (1)
  MYC-SAMA5D3X (1)
  MYD-JA5D4X (3)
  NXP Boards  (6) TOP10
  MYD-LPC435X (2)
  MYD-LPC185X (1)
  MYD-LPC1788 (0)
  MYS-6ULX (3)
  Samsung Boards  (0) TOP10
  TI Boards  (21) TOP10
  MYD-AM335X (9)
  MYC-AM335X (1)
  Rico Board (6)
  MYD-C437X-PRU (5)
  Other  (3) TOP10
  MY-WF003U (1)
  Freescale Boards  (2) TOP10
  MYD-IMX28X (2)
  Xilinx Boards  (25) TOP10
  Z-turn Board (10)
  MYD-C7Z010/20 (7)
  MYD-C7Z015 (7)
  Home >  Support > TI Boards > Rico Board
What are the boot modes of Rico board?
What are the boot modes of Rico board?
The Rico board has three boot modes:

Mode 1: Boot from a TF Card, Load Ramdisk Filesystem 

Mode 2: Boot from a TF Card, Load Ext4 Filesystem 

Mode 3: Boot from the QSPI Flash, Load Ext4 Filesystem of eMMC 

The Mode 3 is the default loading mode. The boot mechanisms and corresponding program steps
of above three loading modes are described in
the following sections.

JP1 and JP2 boot sequences :

JP1 Close  JP2 Open: QSPI->USB1->MMC0->USB0 
Open Close MMC0->MMC1->USB1->USB0 
Close Close NAND->USB1->MMC0->USB0

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: or  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2017 all rights reserved.