Shopping Cart | 中文网站
 
 
Overview
Online Support
FAQ
  Atmel Boards  (37) TOP10
  MYD-SAM9X5 (9)
  MYS-SAM9X5 (2)
  MYS-SAM9G45 (1)
  MYD-SAMA5D3X (14)
  MYD-SAM9X5-V2 (2)
  MYC-SAM9X5 (4)
  MYC-SAM9X5-V2 (1)
  MYC-SAMA5D3X (1)
  MYD-JA5D4X (3)
  NXP Boards  (6) TOP10
  MYD-LPC435X (2)
  MYD-LPC185X (1)
  MYD-LPC1788 (0)
  MYS-6ULX (3)
  Samsung Boards  (0) TOP10
  TI Boards  (21) TOP10
  MYD-AM335X (9)
  MYC-AM335X (1)
  Rico Board (6)
  MYD-C437X-PRU (5)
  Other  (3) TOP10
  MY-WF003U (1)
  Freescale Boards  (2) TOP10
  MYD-IMX28X (2)
  Xilinx Boards  (25) TOP10
  Z-turn Board (10)
  MYD-C7Z010/20 (7)
  MYD-C7Z015 (7)
 
  Home >  Support > Xilinx Boards > Z-turn Board
 
How to debug Z-turn Board?
 
Question
How to debug Z-turn Board?
Answer

You can use Xilinx JTAG emulator Xilinx USB DLC9 (Platform Cable USB) through below ways:

1.      download code FPGA array through SDK

2.      download and debug ARM kernel non-OS programs through SDK (for example, first boot program)


It is no need emulator if using Linux OS, it can update OS through TF card directly.


If there is no TF card, you can also use JTAG to download Linux OS (ramdisk file system). First, download u-boot, kernel and ramdisk to RAM through JTAG; then run the u-boot in RAM; then program through u-boot and boot Linux. This way is relative complex; we do not provide technical support.


If you need only debug the PS (ARM) part like u-boot, kernel, you can use DS-5 and DSTREAM emulator. You can also use ULINKpro or ULINKpro-D emulator.


 

Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District, Shenzhen, Guangdong, China 518129
E-mail: sales@myirtech.com or myirtech@yahoo.com  Phone: +86-755-22984836  Fax: +86-755-25532724
Copyright © MYIR Tech Limited 2011-2017 all rights reserved.